[U-Boot-Users] [PATCH: cmdcfg: 01/19] Introduce initial versions of new Command Config files.
Jon Loeliger
jdl at jdl.com
Tue Jun 12 02:01:34 CEST 2007
Derive three new files from cmd_confdefs.h:
config_bootp.h - Has BOOTP related config options, not commands
config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
For now, include "config_bootp.h" for compatability until all
users of it directly include it properly.
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
include/cmd_confdefs.h | 30 ++--------------
include/config_bootp.h | 41 +++++++++++++++++++++
include/config_cmd_all.h | 80 ++++++++++++++++++++++++++++++++++++++++++
include/config_cmd_default.h | 41 +++++++++++++++++++++
4 files changed, 165 insertions(+), 27 deletions(-)
create mode 100644 include/config_bootp.h
create mode 100644 include/config_cmd_all.h
create mode 100644 include/config_cmd_default.h
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index b3ccdce..9b4545f 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -155,33 +155,9 @@
/*
- * optional BOOTP fields
+ * Temporary placeholder until all users directly
+ * include the proper include file, "config_bootp.h".
*/
-
-#define CONFIG_BOOTP_SUBNETMASK 0x00000001
-#define CONFIG_BOOTP_GATEWAY 0x00000002
-#define CONFIG_BOOTP_HOSTNAME 0x00000004
-#define CONFIG_BOOTP_NISDOMAIN 0x00000008
-#define CONFIG_BOOTP_BOOTPATH 0x00000010
-#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
-#define CONFIG_BOOTP_DNS 0x00000040
-#define CONFIG_BOOTP_DNS2 0x00000080
-#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100
-#define CONFIG_BOOTP_NTPSERVER 0x00000200
-#define CONFIG_BOOTP_TIMEOFFSET 0x00000400
-
-#define CONFIG_BOOTP_VENDOREX 0x80000000
-
-#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
-
-
-#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
- CONFIG_BOOTP_GATEWAY | \
- CONFIG_BOOTP_HOSTNAME | \
- CONFIG_BOOTP_BOOTPATH)
-
-#ifndef CONFIG_BOOTP_MASK
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-#endif
+#include "config_bootp.h"
#endif /* _CMD_CONFIG_H */
diff --git a/include/config_bootp.h b/include/config_bootp.h
new file mode 100644
index 0000000..f0c9360
--- /dev/null
+++ b/include/config_bootp.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_BOOTP_H
+#define _CONFIG_BOOTP_H
+
+/*
+ * Optional BOOTP fields
+ */
+
+#define CONFIG_BOOTP_SUBNETMASK 0x00000001
+#define CONFIG_BOOTP_GATEWAY 0x00000002
+#define CONFIG_BOOTP_HOSTNAME 0x00000004
+#define CONFIG_BOOTP_NISDOMAIN 0x00000008
+#define CONFIG_BOOTP_BOOTPATH 0x00000010
+#define CONFIG_BOOTP_BOOTFILESIZE 0x00000020
+#define CONFIG_BOOTP_DNS 0x00000040
+#define CONFIG_BOOTP_DNS2 0x00000080
+#define CONFIG_BOOTP_SEND_HOSTNAME 0x00000100
+#define CONFIG_BOOTP_NTPSERVER 0x00000200
+#define CONFIG_BOOTP_TIMEOFFSET 0x00000400
+
+#define CONFIG_BOOTP_VENDOREX 0x80000000
+
+#define CONFIG_BOOTP_ALL (~CONFIG_BOOTP_VENDOREX)
+
+#define CONFIG_BOOTP_DEFAULT (CONFIG_BOOTP_SUBNETMASK | \
+ CONFIG_BOOTP_GATEWAY | \
+ CONFIG_BOOTP_HOSTNAME | \
+ CONFIG_BOOTP_BOOTPATH)
+
+#ifndef CONFIG_BOOTP_MASK
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+#endif
+
+#endif /* _CONFIG_BOOTP_H */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
new file mode 100644
index 0000000..14801b5
--- /dev/null
+++ b/include/config_cmd_all.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_CMD_ALL_H
+#define _CONFIG_CMD_ALL_H
+
+/*
+ * Alphabetical list of all possible commands.
+ */
+
+#define CONFIG_CMD_ASKENV /* ask for env variable */
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
+#define CONFIG_CMD_BMP /* BMP support */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_BSP /* Board Specific functions */
+#define CONFIG_CMD_CACHE /* icache, dcache */
+#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_DATE /* support for RTC, date/time...*/
+#define CONFIG_CMD_DHCP /* DHCP Support */
+#define CONFIG_CMD_DIAG /* Diagnostics */
+#define CONFIG_CMD_DISPLAY /* Display support */
+#define CONFIG_CMD_DOC /* Disk-On-Chip Support */
+#define CONFIG_CMD_DTT /* Digital Therm and Thermostat */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_EEPROM /* EEPROM read/write support */
+#define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */
+#define CONFIG_CMD_ENV /* saveenv */
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_FDC /* Floppy Disk Support */
+#define CONFIG_CMD_FDOS /* Floppy DOS support */
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_IDE /* IDE harddisk support */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_IMMAP /* IMMR dump support */
+#define CONFIG_CMD_IRQ /* irqinfo */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
+#define CONFIG_CMD_KGDB /* kgdb */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MFSL /* FSL support for Microblaze */
+#define CONFIG_CMD_MII /* MII support */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PCI /* pciinfo */
+#define CONFIG_CMD_PCMCIA /* PCMCIA support */
+#define CONFIG_CMD_PING /* ping support */
+#define CONFIG_CMD_PORTIO /* Port I/O */
+#define CONFIG_CMD_REGINFO /* Register dump */
+#define CONFIG_CMD_REISER /* Reiserfs support */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVES /* save S record dump */
+#define CONFIG_CMD_SCSI /* SCSI Support */
+#define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SNTP /* SNTP support */
+#define CONFIG_CMD_SPI /* SPI utility */
+#define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */
+#define CONFIG_CMD_USB /* USB Support */
+#define CONFIG_CMD_VFD /* VFD support (TRAB) */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+#endif /* _CONFIG_CMD_ALL_H */
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
new file mode 100644
index 0000000..81eba01
--- /dev/null
+++ b/include/config_cmd_default.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License Version 2. This file is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _CONFIG_CMD_DEFAULT_H
+#define _CONFIG_CMD_DEFAULT_H
+
+/*
+ * Alphabetical list of all commands that are configured by default.
+ * This is essentially all commands minus those that are considered
+ * "non-standard" for some reason (memory hogs, requires special
+ * hardware, not fully tested, etc.).
+ */
+
+#define CONFIG_CMD_AUTOSCRIPT /* Autoscript Support */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_ENV /* saveenv */
+#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_IMLS /* List all found images */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+#endif /* _CONFIG_CMD_DEFAULT_H */
+#endif /* _CONFIG_CMD_DEFAULT_H */
--
1.5.2.1.239.g75d8
More information about the U-Boot
mailing list