[U-Boot-Users] U-boot-testing.

[Leonid]

Can you tell me please where I can learn more about u-boot testing
repository (some READMEs, etc...)? What this project is about (well,
it's apparently testing something, but testing is to broad a
definition), how to use it, etc... Does it have anything in common with
Denx Universal Testing Suite (DUTS) project (I would like to learn about
last one too).

Thanks,

Leonid.

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of mushtaq
khan
Sent: Friday, June 15, 2007 11:24 PM
To: Wolfgang Denk
Cc: u-boot-user
Subject: Re: [U-Boot-Users] U-boot-testing.


Hi Wolfgang Denk,

       I had submitted the sata patch with respect to u-boot-testing 
repository.I  didn't get any feedbac, what is the next step? Please let 
me know.

Thanks,
-Mushtaq


mushtaq khan wrote:

> Hi  Wolfgang Denk,
>
>   Attached a sata patch with respect to u-boot-testing repository, 
> this resolves the proto-type mismatch between sata_read and
block_read.
>
> Thanks,
> -Mushtaq
>
>
> Wolfgang Denk wrote:
>
>> Hello,
>>
>> in message <46652EF4.1030707 at procsys.com> you wrote:
>>  
>>
>>> I tested my patches in u-boot-testing
>>> 1. Clearing of bss section patch  and
>>> 2. Sata patch.
>>>   
>>
>>
>> Thanks.
>>
>>  
>>
>>> I will bring these changes to my patch. And after testing , i will 
>>> re-submit the patch.
>>>   
>>
>>
>> No. Please submit a new patch against current top-of-tree in the
>> u-boot-testing repository.
>>
>> Thanks.
>>
>> Best regards,
>>
>> Wolfgang Denk
>>
>>  
>>
>
>-----------------------------------------------------------------------
-
>
>diff -purN u-boot-testing/common/cmd_sata.c
u-boot-testing_chg/common/cmd_sata.c
>--- u-boot-testing/common/cmd_sata.c	2007-06-05 12:05:10.000000000
+0530
>+++ u-boot-testing_chg/common/cmd_sata.c	2007-06-07
13:46:55.000000000 +0530
>@@ -375,9 +375,9 @@ msleep (int count)
> }
> 
> ulong
>-sata_read (int device, lbaint_t blknr, ulong blkcnt, ulong * buffer)
>+sata_read (int device, ulong blknr,lbaint_t blkcnt, void * buff)
> {
>-	ulong n = 0;
>+	ulong n = 0, *buffer = (ulong *)buff;
> 	u8 dev = 0, num = 0, mask = 0, status = 0;
> 
> #ifdef CONFIG_LBA48
>@@ -482,9 +482,9 @@ sata_read (int device, lbaint_t blknr, u
> }
> 
> ulong
>-sata_write (int device, lbaint_t blknr, ulong blkcnt, ulong * buffer)
>+sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
> {
>-	ulong n = 0;
>+	ulong n = 0, *buffer = (ulong *)buff;
> 	unsigned char status = 0, num = 0, dev = 0, mask = 0;
> 
> #ifdef CONFIG_LBA48
>diff -purN u-boot-testing/include/sata.h
u-boot-testing_chg/include/sata.h
>--- u-boot-testing/include/sata.h	2007-06-05 12:05:11.000000000
+0530
>+++ u-boot-testing_chg/include/sata.h	2007-06-07 13:43:08.000000000
+0530
>@@ -28,8 +28,8 @@ struct sata_port {
> 	struct sata_ioports ioaddr;	/* ATA cmd/ctl/dma reg blks
*/
> 	unsigned char ctl_reg;
> 	unsigned char last_ctl;
>-	unsigned char port_state;	/* 1-port is present and
*/
>-					   0-port is not available
*/
>+	unsigned char port_state;	/* 1-port is available and
*/
>+					/* 0-port is not available
*/
> 	unsigned char dev_mask;
> };
> 
>@@ -74,18 +74,18 @@ int sata_devchk (struct sata_ioports *io
> void dev_select (struct sata_ioports *ioaddr, int dev);
> u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits, unsigned int
max);
> u8 sata_chk_status (struct sata_ioports *ioaddr);
>-ulong sata_read (int device, lbaint_t blknr, ulong blkcnt, ulong *
buffer);
>-ulong sata_write (int device, lbaint_t blknr, ulong blkcnt, ulong *
buffer);
>+ulong sata_read (int device, ulong blknr,lbaint_t blkcnt, void *
buffer);
>+ulong sata_write (int device,ulong blknr, lbaint_t blkcnt, void *
buffer);
> void msleep (int count);
> #else
> extern int sata_bus_softreset (int num);
> extern void sata_identify (int num, int dev);
> extern void sata_port (struct sata_ioports *ioport);
> extern void set_Feature_cmd (int num, int dev);
>-extern ulong sata_read (int device, lbaint_t blknr,
>-			ulong blkcnt, ulong * buffer);
>-extern ulong sata_write (int device, lbaint_t blknr,
>-			 ulong blkcnt, ulong * buffer);
>+extern ulong sata_read (int device, ulong blknr,
>+			lbaint_t blkcnt, void * buffer);
>+extern ulong sata_write (int device, ulong blknr,
>+			lbaint_t blkcnt, void * buffer);
> extern void msleep (int count);
> #endif
> 
>  
>


------------------------------------------------------------------------
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users