[U-Boot-Users] a problem of rtl8019.c

buaafree buaafree at gmail.com
Wed Jun 20 11:00:22 CEST 2007


Hi,all
   I have a board with cpu-s3c2410,eth controller-realtek8019as.I found the function nic_to_pc() in ~/u-boot-1.2.0/drivers/rtl8019.c with a mistake.If using the following way
    rec_head_status = get_reg (RTL8019_DMA_DATA);
    next_packet_pointer = get_reg (RTL8019_DMA_DATA);
    packet_length0 = get_reg (RTL8019_DMA_DATA);
    packet_length1 = get_reg (RTL8019_DMA_DATA);
for reading receive buffer,the four variable of "rec_head_status  next_packet_pointer packet_length0 packet_length1" can't get correct value.But
if reading the four bytes by using one array to store,it's ok.In other words,it's wrong,if storing every byte in an individual variable.
    Who can tell me why?
    Thanks!
Darren



buaafree
2007-06-20
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070620/b207127e/attachment.htm 


More information about the U-Boot mailing list