[U-Boot-Users] Ethnet doesn't work [OT]

[Clemens Koller]

Hi, disonlo!

disonlo schrieb:
>      Does anybody know about Marvell 88E1118 chip? I meet a issue about it. We 
> make a board based on Marvell5182, but differs with the demo board. We use 88E1118 
> instead of 88E1111 on demo board, when connecting the board to the 100M switcher via 
> the ethnet port, I can't PING other addresses, but when connecting it to the 1000M 
> switcher, I can PING other addresses.

Without schematics it's hard to tell, but it seems like a hardware issue.
You could propably check the LED/CONFIG pins if the PHY comes in the
right autonegotiation mode which you propably need.

This seems to be OT here.

Regards,
-- 
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com