[U-Boot-Users] USB storage support question

[Ulf Samuelsson]

>> 
>> I have the AT91RM9200EK board, and I want to do something with the USB
>> host ports on the board, so I've put the following in my at91rm9200dk.h
>> config file:
> 
> The at91rm9200dk.h configuration is for the DK board, not the EK.
> 
> Are you sure this can work?
> 


Is the ohci driver really there?
Check cpu/arm920t/at91rm9200

The OHCI is integrated on the chip, so there should be no problem
in most cases to use the DK configuration.
There are a few small differences, but normally they do not affect U-Boot.



> Best regards,
> 
> Wolfgang Denk
> 


Best Regards
Ulf Samuelsson