[U-Boot-Users] Micron NAND Driver

[Aubrey Li]

On 3/27/07, Raghu <raghu_dk at yahoo.com> wrote:
> Hello All,
>
> I have a custom OMAP2430 board with Micron NAND
> (MT29F1G16ABB) as a PoP interface.
>
> I have the Vendor ID and Device ID entried in the
> NAND.h file and during U-Boot start up I am able to
> see the prints called from "nand_init" function.
>
> Is there a patch to add the READ/PROGRAM commands for
> this chip?
>
Please refer to u-boot/doc/README.nand

-Aubrey