[U-Boot-Users] Running w/o flash

[Matt Gessner]

When I do that, cramfs fails to build.

I'm using JFFS2, if that helps.

Regards,

Matt

> -----Original Message-----
> From: Ulf Samuelsson [mailto:ulf at atmel.com]
> Sent: Tuesday, March 27, 2007 12:07 PM
> To: Matt Gessner
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] Running w/o flash
> 
> Matt Gessner skrev:
> > Hi,
> >
> > Can someone please point me to documentation that describes how to
> > configure u-boot to not use traditional flash but still allow things
> > like NAND and Dataflash?
> >
> > My board doesn't have traditional flash so I'm not sure why I need
to
> > tell u-boot that there is some.
> >
> > I suppose it may be the case that I have to pretend it's there but
never
> > use it, but I would like confirmation of this if possible.
> >
> > Thanks,
> 
> You set CFG_NO_FLASH in your <board.h>
> The current U-Boot lacks patches, so you still get some bloat...
> 
> Atmels U-Boot has more patches.
> Have extracted them and I plan to send it to the list shortly.
> 
> --
> Best Regards,
> Ulf Samuelsson