[U-Boot-Users] Flash Erase/Write error in uboot

Shiju Mathew mshiju at gmail.com
Thu May 3 20:40:20 CEST 2007

On Wed, 2007-02-05 at 18:10 -0500, Tolunay Orkun wrote:
> Shiju Mathew wrote:
> > On Wed, 2007-02-05 at 02:29 +0200, Wolfgang Denk wrote:
> >   
> >   
> Does this happen with DEBUG enabled? Did you check with DEBUG disabled? 
> I noticed that DEBUG distrupts some of the registers used for status 
> checking...
> If you have to have DEBUG enabled for testing something else please put 
> #undef DEBUG towards the beginning of cfi_flash.c (after #include etc)
Looks likes some other issue. On our Freescale imx31 ADS  board we have
connected an extension board(RAM like device) to CS1 through the logical
analyser interface. The problem happens when I connect the extension
board(even without powering up the extension board). If I remove the
extension board the flash erase/writes are successfull.


More information about the U-Boot mailing list