[U-Boot-Users] u-boot(1.1.6) for adm5120 problem

Robert Delien robert.delien at nxp.com
Fri May 11 10:57:33 CEST 2007

Hello XWolf,

> i want to compile bootloader for my board(adm5120).
> i use buildroot to build a cross-toolchain.
> (some tools is:
> binutils- gcc-3.4.4.tar.bz2 
uClibc-0.9.27.tar.bz2...), and 
> i can use the cross-toolchain to compile my kernel, and is ok!
> so, i use it to compile the u-boot(the patch for adm5120
> [http://www.nerdclub.nl/u-boot/adm5120-support.txt] is ok), but i got 
> error:


> make: *** [u-boot] error 139
> anybody can tell me , where is wrong?

I have made that patch you're using. Always use the ELDK tool set for 
building U-Boot, especially for the MIPS platform because there's some 
trickery in makefiles to determine the endianity of the compiler by it's 

Good luck!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070511/8a65588d/attachment.htm 

More information about the U-Boot mailing list