[U-Boot-Users] [PATCH u-boot-fdt] FDT command improvements.
Jerry Van Baren
gvb.uboot at gmail.com
Sat May 12 16:05:43 CEST 2007
Fix "fdt set" so that it will create a non-existing property.
Add "fdt mknode" to create nodes.
Signed-off-by: Gerald Van Baren <vanbaren at cideas.com>
---
common/cmd_fdt.c | 271 ++++++++++++++++++++++++++++-------------------------
1 files changed, 143 insertions(+), 128 deletions(-)
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index a119985..8402ca7 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -56,27 +56,38 @@ static char data[SCRATCHPAD];
static int fdt_valid(void);
static void print_data(const void *data, int len);
+static int findnodeoffset(const char *pathp)
+{
+ int nodeoffset;
+
+ if (strcmp(pathp, "/") == 0) {
+ nodeoffset = 0;
+ } else {
+ nodeoffset = fdt_path_offset (fdt, pathp);
+ if (nodeoffset < 0) {
+ /*
+ * Not found or something else bad happened.
+ */
+ printf ("findnodeoffset() libfdt: %s\n", fdt_strerror(nodeoffset));
+ }
+ }
+ return nodeoffset;
+}
/*
* Flattened Device Tree command, see the help for parameter definitions.
*/
int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- char op;
-
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
- /*
- * Figure out which subcommand was given
- */
- op = argv[1][0];
/********************************************************************
* Set the address of the fdt
********************************************************************/
- if (op == 'a') {
+ if (argv[1][0] == 'a') {
/*
* Set the address [and length] of the fdt.
*/
@@ -102,7 +113,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
*/
err = fdt_open_into(fdt, fdt, len);
if (err != 0) {
- printf ("libfdt: %s\n", fdt_strerror(err));
+ printf ("libfdt fdt_open_into(): %s\n", fdt_strerror(err));
}
}
}
@@ -110,7 +121,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/********************************************************************
* Move the fdt
********************************************************************/
- } else if (op == 'm') {
+ } else if ((argv[1][0] == 'm') && (argv[1][1] == 'o')) {
struct fdt_header *newaddr;
int len;
int err;
@@ -150,15 +161,48 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
*/
err = fdt_open_into(fdt, newaddr, len);
if (err != 0) {
- printf ("libfdt: %s\n", fdt_strerror(err));
+ printf ("libfdt fdt_open_into(): %s\n", fdt_strerror(err));
return 1;
}
fdt = newaddr;
/********************************************************************
- * Set the value of a node in the fdt.
+ * Make a new node
+ ********************************************************************/
+ } else if ((argv[1][0] == 'm') && (argv[1][1] == 'k')) {
+ char *pathp; /* path */
+ char *nodep; /* new node to add */
+ int nodeoffset; /* node offset from libfdt */
+ int err;
+
+ /*
+ * Parameters: Node path, new node to be appended to the path.
+ */
+ if (argc < 4) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ pathp = argv[2];
+ nodep = argv[3];
+
+ nodeoffset = findnodeoffset(pathp);
+ if (nodeoffset < 0) {
+ /*
+ * Not found or something else bad happened.
+ */
+ return 1;
+ }
+ err = fdt_add_subnode(fdt, nodeoffset, nodep);
+ if (err < 0) {
+ printf ("libfdt fdt_add_subnode(): %s\n", fdt_strerror(err));
+ return 1;
+ }
+
+ /********************************************************************
+ * Set the value of a property in the fdt.
********************************************************************/
- } else if (op == 's') {
+ } else if (argv[1][0] == 's') {
char *pathp; /* path */
char *prop; /* property */
struct fdt_property *nodep; /* node struct pointer */
@@ -183,102 +227,85 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
prop = argv[3];
newval = argv[4];
- if (strcmp(pathp, "/") == 0) {
- nodeoffset = 0;
- } else {
- nodeoffset = fdt_path_offset (fdt, pathp);
- if (nodeoffset < 0) {
- /*
- * Not found or something else bad happened.
- */
- printf ("libfdt: %s\n", fdt_strerror(nodeoffset));
- return 1;
- }
- }
- nodep = fdt_getprop (fdt, nodeoffset, prop, &oldlen);
- if (oldlen < 0) {
- printf ("libfdt %s\n", fdt_strerror(oldlen));
- return 1;
- } else if (oldlen == 0) {
+ nodeoffset = findnodeoffset(pathp);
+ if (nodeoffset < 0) {
/*
- * The specified property has no value
+ * Not found or something else bad happened.
*/
- printf("%s has no value, cannot set one (yet).\n", prop);
return 1;
- } else {
+ }
+ /*
+ * Convert the new property
+ */
+ vp = data;
+ if (*newval == '<') {
/*
- * Convert the new property
+ * Bigger values than bytes.
*/
- vp = data;
- if (*newval == '<') {
- /*
- * Bigger values than bytes.
- */
- len = 0;
- newval++;
- while ((*newval != '>') && (*newval != '\0')) {
- cp = newval;
- tmp = simple_strtoul(cp, &newval, 16);
- if ((newval - cp) <= 2) {
- *vp = tmp & 0xFF;
- vp += 1;
- len += 1;
- } else if ((newval - cp) <= 4) {
- *(uint16_t *)vp = __cpu_to_be16(tmp);
- vp += 2;
- len += 2;
- } else if ((newval - cp) <= 8) {
- *(uint32_t *)vp = __cpu_to_be32(tmp);
- vp += 4;
- len += 4;
- } else {
- printf("Sorry, I could not convert \"%s\"\n", cp);
- return 1;
- }
- while (*newval == ' ')
- newval++;
- }
- if (*newval != '>') {
- printf("Unexpected character '%c'\n", *newval);
- return 1;
- }
- } else if (*newval == '[') {
- /*
- * Byte stream. Convert the values.
- */
- len = 0;
- newval++;
- while ((*newval != ']') && (*newval != '\0')) {
- tmp = simple_strtoul(newval, &newval, 16);
- *vp++ = tmp & 0xFF;
- len++;
- while (*newval == ' ')
- newval++;
- }
- if (*newval != ']') {
- printf("Unexpected character '%c'\n", *newval);
+ len = 0;
+ newval++;
+ while ((*newval != '>') && (*newval != '\0')) {
+ cp = newval;
+ tmp = simple_strtoul(cp, &newval, 16);
+ if ((newval - cp) <= 2) {
+ *vp = tmp & 0xFF;
+ vp += 1;
+ len += 1;
+ } else if ((newval - cp) <= 4) {
+ *(uint16_t *)vp = __cpu_to_be16(tmp);
+ vp += 2;
+ len += 2;
+ } else if ((newval - cp) <= 8) {
+ *(uint32_t *)vp = __cpu_to_be32(tmp);
+ vp += 4;
+ len += 4;
+ } else {
+ printf("Sorry, I could not convert \"%s\"\n", cp);
return 1;
}
- } else {
- /*
- * Assume it is a string. Copy it into our data area for
- * convenience (including the terminating '\0').
- */
- len = strlen(newval) + 1;
- strcpy(data, newval);
+ while (*newval == ' ')
+ newval++;
}
-
- ret = fdt_setprop(fdt, nodeoffset, prop, data, len);
- if (ret < 0) {
- printf ("libfdt %s\n", fdt_strerror(ret));
+ if (*newval != '>') {
+ printf("Unexpected character '%c'\n", *newval);
+ return 1;
+ }
+ } else if (*newval == '[') {
+ /*
+ * Byte stream. Convert the values.
+ */
+ len = 0;
+ newval++;
+ while ((*newval != ']') && (*newval != '\0')) {
+ tmp = simple_strtoul(newval, &newval, 16);
+ *vp++ = tmp & 0xFF;
+ len++;
+ while (*newval == ' ')
+ newval++;
+ }
+ if (*newval != ']') {
+ printf("Unexpected character '%c'\n", *newval);
return 1;
}
+ } else {
+ /*
+ * Assume it is a string. Copy it into our data area for
+ * convenience (including the terminating '\0').
+ */
+ len = strlen(newval) + 1;
+ strcpy(data, newval);
+ }
+
+ ret = fdt_setprop(fdt, nodeoffset, prop, data, len);
+ if (ret < 0) {
+ printf ("libfdt fdt_setprop(): %s\n", fdt_strerror(ret));
+ return 1;
}
/********************************************************************
* Print (recursive) / List (single level)
********************************************************************/
- } else if ((op == 'p') || (op == 'l')) {
+ } else if ((argv[1][0] == 'p') || (argv[1][0] == 'l')) {
/*
* Recursively print (a portion of) the fdt.
*/
@@ -297,7 +324,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/*
* list is an alias for print, but limited to 1 level
*/
- if (op == 'l') {
+ if (argv[1][0] == 'l') {
depth = 1;
}
@@ -311,18 +338,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
else
prop = NULL;
- if (strcmp(pathp, "/") == 0) {
- nodeoffset = 0;
- printf("/");
- } else {
- nodeoffset = fdt_path_offset (fdt, pathp);
- if (nodeoffset < 0) {
- /*
- * Not found or something else bad happened.
- */
- printf ("libfdt %s\n", fdt_strerror(nodeoffset));
- return 1;
- }
+ nodeoffset = findnodeoffset(pathp);
+ if (nodeoffset < 0) {
+ /*
+ * Not found or something else bad happened.
+ */
+ return 1;
}
/*
* The user passed in a property as well as node path. Print only
@@ -339,7 +360,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
printf("\n");
return 0;
} else {
- printf ("libfdt %s\n", fdt_strerror(len));
+ printf ("libfdt fdt_getprop(): %s\n", fdt_strerror(len));
return 1;
}
}
@@ -359,7 +380,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
level++;
offstack[level] = nodeoffset;
if (level >= MAX_LEVEL) {
- printf("Aaaiii <splat> nested too deep.\n");
+ printf("Aaaiii <splat> nested too deep. Aborting.\n");
return 1;
}
break;
@@ -374,7 +395,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
case FDT_PROP:
nodep = fdt_getprop (fdt, offstack[level], pathp, &len);
if (len < 0) {
- printf ("libfdt %s\n", fdt_strerror(len));
+ printf ("libfdt fdt_getprop(): %s\n", fdt_strerror(len));
return 1;
} else if (len == 0) {
/* the property has no value */
@@ -403,7 +424,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/********************************************************************
* Remove a property/node
********************************************************************/
- } else if (op == 'r') {
+ } else if (argv[1][0] == 'r') {
int nodeoffset; /* node offset from libfdt */
int err;
@@ -411,17 +432,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
* Get the path. The root node is an oddball, the offset
* is zero and has no name.
*/
- if (strcmp(argv[2], "/") == 0) {
- nodeoffset = 0;
- } else {
- nodeoffset = fdt_path_offset (fdt, argv[2]);
- if (nodeoffset < 0) {
- /*
- * Not found or something else bad happened.
- */
- printf ("libfdt %s\n", fdt_strerror(nodeoffset));
- return 1;
- }
+ nodeoffset = findnodeoffset(argv[2]);
+ if (nodeoffset < 0) {
+ /*
+ * Not found or something else bad happened.
+ */
+ return 1;
}
/*
* Do the delete. A fourth parameter means delete a property,
@@ -430,13 +446,13 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
if (argc > 3) {
err = fdt_delprop(fdt, nodeoffset, argv[3]);
if (err < 0) {
- printf("fdt_delprop libfdt: %s\n", fdt_strerror(err));
+ printf("libfdt fdt_delprop(): %s\n", fdt_strerror(err));
return err;
}
} else {
err = fdt_del_node(fdt, nodeoffset);
if (err < 0) {
- printf("fdt_del_node libfdt: %s\n", fdt_strerror(err));
+ printf("libfdt fdt_del_node(): %s\n", fdt_strerror(err));
return err;
}
}
@@ -444,19 +460,19 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
/********************************************************************
* Create a chosen node
********************************************************************/
- } else if (op == 'c') {
+ } else if (argv[1][0] == 'c') {
fdt_chosen(fdt, 0, 0, 1);
/********************************************************************
* Create a u-boot-env node
********************************************************************/
- } else if (op == 'e') {
+ } else if (argv[1][0] == 'e') {
fdt_env(fdt);
/********************************************************************
* Create a bd_t node
********************************************************************/
- } else if (op == 'b') {
+ } else if (argv[1][0] == 'b') {
fdt_bd_t(fdt);
/********************************************************************
@@ -486,7 +502,7 @@ static int fdt_valid(void)
return 1; /* valid */
if (err < 0) {
- printf("libfdt: %s", fdt_strerror(err));
+ printf("libfdt fdt_check_header(): %s", fdt_strerror(err));
/*
* Be more informative on bad version.
*/
@@ -630,7 +646,6 @@ U_BOOT_CMD(
"fdt bd_t - Add/replace the \"/bd_t\" branch in the tree\n"
#endif
"Hints:\n"
- " * Set a larger length with the fdt addr command to add to the blob.\n"
" * If the property you are setting/printing has a '#' character,\n"
" you MUST escape it with a \\ character or quote it with \" or\n"
" it will be ignored as a comment.\n"
--
1.4.4.4
More information about the U-Boot
mailing list