[U-Boot-Users] [PATCH] ARM Versatile PB926EJ-S, Rev.D: Added support for flash 28F256L30B
Josef.Meser at odm.at
Fri May 25 09:12:59 CEST 2007
> From: Stefan Roese [mailto:sr at denx.de]
> Sent: Friday, May 25, 2007 8:03 AM
> To: u-boot-users at lists.sourceforge.net
> Cc: Josef Meser; Peter Pearse
> Subject: Re: [U-Boot-Users] [PATCH] ARM Versatile PB926EJ-S,
> Rev.D: Added support for flash 28F256L30B
> Hi Josef,
> On Friday 25 May 2007, Josef Meser wrote:
> > Current u-boot works with ARM Versatile PB926EJ-S, HW- Rev.C
> > (NOR flash 28F256K3).
> > This patch adds support for 28F256L30B (asymmetrical sectors:
> > 4 small sectors at bottom) used on HW-Rev.D.
> Your patch is line wrapped. Please fix and resend.
sorry about that. Yesterday I sent the patch to myself and it
was not line wrapped. Now I learned that this is a feature of
our famous M$-MUA, which does line wraps in plain text messages,
when sending to "Internet addresses".
I will fix this by using a real MUA.
> One question: Why can't you use the common CFI driver on this board?
I have to admit that I am not familiar with the CFI driver. I made the
patch for u-boot-1.1.5 which we used up to now. There it makes a
> make versatile_config
> make all
work on the new HW. Rev.D.
As i did not find the new type of flash in the current source tree,
I submitted my changes. This changes are minimal (in terms of size
and function) for me, which does not mean that they are optimal
for someone who is more into u-boot.
More information about the U-Boot