[U-Boot-Users] U-Boot-Users Digest, Vol 12, Issue 98

白栋贤 bdx_1981 at hotmail.com
Mon May 28 02:19:42 CEST 2007 

Sorry,
     I forgeted to check its formatting before sending last mail.
My board's info as following: 
1 CPU: PXA270 
2 SDRAM :0xA0000000 - 0xA4000000 64M
3 BOOT: nCS<0> CODE: 0x00000000
4 FFUART      GPIO34 FFRXD
      GPIO35 FFCTS
      GPIO36 FFDCD
      GPIO37 FFDSR 
      GPIO38 FFRI 
      GPIO39 FFTXD 
      GPIO40 FFDTR 
      GPIO41 FFRTS 
As I'm a newer to uboot and PXA270, so in my opine, after patched the uboot114 directory, I just need to modify the mainstone.h to fit my board. But I failed. Then after compared with start.S for other cpus such as ixp, I found that the reset code are very similar to each other. At first I doubted about the reset code, so I modified start.S and lowlevel_Init.S with the start code of blob. But I failed yet. Could you possible give me some suggestion? Thank you very much.
Best regards
John> From: u-boot-users-request at lists.sourceforge.net> Subject: U-Boot-Users Digest, Vol 12, Issue 98> To: u-boot-users at lists.sourceforge.net> Date: Fri, 25 May 2007 07:29:03 -0700> > Send U-Boot-Users mailing list submissions to> u-boot-users at lists.sourceforge.net> > To subscribe or unsubscribe via the World Wide Web, visit> https://lists.sourceforge.net/lists/listinfo/u-boot-users> or, via email, send a message with subject or body 'help' to> u-boot-users-request at lists.sourceforge.net> > You can reach the person managing the list at> u-boot-users-owner at lists.sourceforge.net> > When replying, please edit your Subject line so it is more specific> than "Re: Contents of U-Boot-Users digest..."> > > Today's Topics:> > 1. Re: Imminent u-boot-fdt pull request (Jerry Van Baren)> 2. Abour JFFS2 commands (Vaibhav Hiremath)> 3. Re: Abour JFFS2 commands (Ladislav Michl)> 4. [PATCH] Fix ppc4xx bootstrap letter displayed on startup> (Benoit Monin)> 5. Re: [RFC] logos directory & default logo (Rodolfo Giometti)> 6. [PATCH] LOGO: All logos must be placed into the "logos"> directory. (Rodolfo Giometti)> 7. [PATCH] LOGO: Allow define "LOGO_BMP" to be globally defined.> (Rodolfo Giometti)> 8. Re: [PATCH] LOGO: All logos must be placed into the "logos"> directory. (Wolfgang Denk)> 9. Re: [PATCH] LOGO: Allow define "LOGO_BMP" to be globally> defined. (Wolfgang Denk)> > > ----------------------------------------------------------------------> > Message: 1> Date: Fri, 25 May 2007 07:54:47 -0400> From: Jerry Van Baren <gerald.vanbaren at smiths-aerospace.com>> Subject: Re: [U-Boot-Users] Imminent u-boot-fdt pull request> To: Kim Phillips <kim.phillips at freescale.com>> Cc: u-boot-users at lists.sourceforge.net> Message-ID: <4656CE87.8080200 at smiths-aerospace.com>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed> > Kim Phillips wrote:> > On Tue, 22 May 2007 00:06:06 -0400> > Jerry Van Baren <gvb.uboot at gmail.com> wrote:> > > >> Dear all,> >>> >> Please review the u-boot-fdt changes. I intend to request Wolfgang pull > >> the pending changes soon. All of the changes (except the last trivial > > > > I have properties being placed at the wrong level, timebase- and> > bus-frequencies not being updated, there are multiple copies of the> > code, and, it is hard to read - I saw a line length of 139!> > > > Please work on your CodingStyle. I haven't finished debugging here.> > > > Kim> > Hi Kim,> > Thanks for the feedback, I'll check things. Pointers to files (and > lines) would be helpful. :-/> > WRT line lengths, Wolfgang dinged me on them so I created a cleanup > patch. As a result, one patch has line length violations and a later > patch fixes them. This may be related to your line length and multiple > copy comment.> > Thanks,> gvb> > > > ------------------------------> > Message: 2> Date: Fri, 25 May 2007 17:41:01 +0530> From: "Vaibhav Hiremath" <hvaibhav at gmail.com>> Subject: [U-Boot-Users] Abour JFFS2 commands> To: u-boot-users at lists.sourceforge.net> Message-ID:> <fde666620705250511l1c5002fcy5a312f19f4423552 at mail.gmail.com>> Content-Type: text/plain; charset="iso-8859-1"> > Hi All,> > How many JFFS commands uboot supports?> > Actually,> I have ported UBoot for ARM1176 CPU, and I am using Intel NOR Flash.> After mounting JFFS2 on to Flash memory I am able to see only "fsinfo" and> "ls" command only.> > There should be rm, cd, etc.. commands. Is I am missing something?> > Thanks in advance.> > Thanks,> Vaibhav> -------------- next part --------------> An HTML attachment was scrubbed...> > ------------------------------> > Message: 3> Date: Fri, 25 May 2007 14:22:56 +0200> From: Ladislav Michl <ladis at linux-mips.org>> Subject: Re: [U-Boot-Users] Abour JFFS2 commands> To: Vaibhav Hiremath <hvaibhav at gmail.com>> Cc: u-boot-users at lists.sourceforge.net> Message-ID: <20070525122256.GA10916 at michl.2n.cz>> Content-Type: text/plain; charset="us-ascii"> > On Fri, May 25, 2007 at 05:41:01PM +0530, Vaibhav Hiremath wrote:> > Hi All,> > > > How many JFFS commands uboot supports?> > > > Actually,> > I have ported UBoot for ARM1176 CPU, and I am using Intel NOR Flash.> > After mounting JFFS2 on to Flash memory I am able to see only "fsinfo" and> > "ls" command only.> > > > There should be rm, cd, etc.. commands. Is I am missing something?> > jffs2 is read-only in u-boot, there fore there is no 'rm' command.> Change directory is not implemented. The only command are:> fsinfo, fsload and ls (it takes agrument: directory to list files in)> > Best regards,> ladis> > > > > ------------------------------> > Message: 4> Date: Fri, 25 May 2007 14:56:05 +0200> From: "Benoit Monin" <benoit.monin at laposte.net>> Subject: [U-Boot-Users] [PATCH] Fix ppc4xx bootstrap letter displayed> on startup> To: "wd" <wd at denx.de>> Cc: u-boot-users <u-boot-users at lists.sourceforge.net>> Message-ID: <JILL9H$2EBD6CBE5F7929B929E9F4475080EFCD at laposte.net>> Content-Type: text/plain; charset="iso-8859-1"> > The attached patch is mainly cosmetic, allowing u-boot to> display the correct bootstrap option letter according to the> datasheets.> > Signed-off-by: Beno?t Monin <bmonin <at> adeneo.eu>> ---> The patch is against U-Boot 1.2.0.> > --> > > Cr?ez votre adresse ?lectronique prenom.nom at laposte.net > 1 Go d'espace de stockage, anti-spam et anti-virus int?gr?s.> -------------- next part --------------> A non-text attachment was scrubbed...> Name: fix_ppc4xx_bootstrap_letter.patch> Type: text/x-patch> Size: 1511 bytes> Desc: not available> > ------------------------------> > Message: 5> Date: Fri, 25 May 2007 15:26:13 +0200> From: Rodolfo Giometti <giometti at enneenne.com>> Subject: Re: [U-Boot-Users] [RFC] logos directory & default logo> To: u-boot-users at lists.sourceforge.net> Message-ID: <20070525132610.GC4199 at enneenne.com>> Content-Type: text/plain; charset=us-ascii> > On Thu, May 24, 2007 at 04:34:57PM +0200, Rodolfo Giometti wrote:> > > > I'd like to modify the logo support. Currently I notice that there are> > only one logo file into "u-boot/tools/logos", however I think is> > About this topic I suppose is better define a "default" logo. My idea> is to leave to the developer the ability to specify its preferre logo> as follow:> > wwpc1100_config : unconfig> @$(MKCONFIG) $(@:_config=) arm pxa wwpc1100> @echo "LOGO_BMP = wwpc1100.bmp" >> include/config.mk> > if no LOGO_BMP is specified then the system uses a "default" logo> which can still be the "denx.bmp".> > Comments?> > Rodolfo> > -- > > GNU/Linux Solutions e-mail: giometti at enneenne.com> Linux Device Driver giometti at gnudd.com> Embedded Systems giometti at linux.it> UNIX programming phone: +39 349 2432127> > > > ------------------------------> > Message: 6> Date: Fri, 25 May 2007 16:20:01 +0200> From: Rodolfo Giometti <giometti at linux.it>> Subject: [U-Boot-Users] [PATCH] LOGO: All logos must be placed into> the "logos" directory.> To: u-boot-users at lists.sourceforge.net> Message-ID: <20070525142001.GD4199 at enneenne.com>> Content-Type: text/plain; charset=us-ascii> > Signed-off-by: Rodolfo Giometti <giometti at linux.it>> ---> tools/Makefile | 6 +++---> 1 files changed, 3 insertions(+), 3 deletions(-)> > diff --git a/tools/Makefile b/tools/Makefile> index 6177f90..14eedf0 100644> --- a/tools/Makefile> +++ b/tools/Makefile> @@ -40,7 +40,7 @@ endif> LOGO_H = $(OBJTREE)/include/bmp_logo.h> > ifeq ($(LOGO_BMP),)> -LOGO_BMP= logos/denx.bmp> +LOGO_BMP= denx.bmp> endif> > #-------------------------------------------------------------------------> @@ -203,8 +203,8 @@ $(obj)crc32.c:> @rm -f $(obj)crc32.c> ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c> > -$(LOGO_H): $(obj)bmp_logo $(LOGO_BMP)> - $(obj)./bmp_logo $(LOGO_BMP) >$@> +$(LOGO_H): $(obj)bmp_logo logos/$(LOGO_BMP)> + $(obj)./bmp_logo logos/$(LOGO_BMP) >$@> > #########################################################################> > -- > 1.5.1.1> > > > > ------------------------------> > Message: 7> Date: Fri, 25 May 2007 16:20:55 +0200> From: Rodolfo Giometti <giometti at linux.it>> Subject: [U-Boot-Users] [PATCH] LOGO: Allow define "LOGO_BMP" to be> globally defined.> To: u-boot-users at lists.sourceforge.net> Message-ID: <20070525142054.GE4199 at enneenne.com>> Content-Type: text/plain; charset=us-ascii> > This allow developers to define per board logo file into main configuration> file as follow:> > wwpc1100_config : unconfig> @$(MKCONFIG) $(@:_config=) arm pxa wwpc1100> @echo "LOGO_BMP = wwpc1100.bmp" >> include/config.mk> > Signed-off-by: Rodolfo Giometti <giometti at linux.it>> ---> Makefile | 4 ++--> 1 files changed, 2 insertions(+), 2 deletions(-)> > diff --git a/Makefile b/Makefile> index 093df4e..c819afb 100644> --- a/Makefile> +++ b/Makefile> @@ -115,7 +115,7 @@ ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))> > # load ARCH, BOARD, and CPU configuration> include $(OBJTREE)/include/config.mk> -export ARCH CPU BOARD VENDOR SOC> +export ARCH CPU BOARD VENDOR SOC LOGO_BMP> > ifndef CROSS_COMPILE> ifeq ($(HOSTARCH),ppc)> @@ -125,7 +125,7 @@ ifeq ($(ARCH),ppc)> CROSS_COMPILE = powerpc-linux-> endif> ifeq ($(ARCH),arm)> -CROSS_COMPILE = arm-eurotech-linux-> +CROSS_COMPILE = arm-linux-> endif> ifeq ($(ARCH),i386)> ifeq ($(HOSTARCH),i386)> -- > 1.5.1.1> > > > > ------------------------------> > Message: 8> Date: Fri, 25 May 2007 16:26:04 +0200> From: Wolfgang Denk <wd at denx.de>> Subject: Re: [U-Boot-Users] [PATCH] LOGO: All logos must be placed> into the "logos" directory.> To: Rodolfo Giometti <giometti at linux.it>> Cc: u-boot-users at lists.sourceforge.net> Message-ID: <20070525142604.C486C352B1F at atlas.denx.de>> Content-Type: text/plain; charset=ISO-8859-1> > In message <20070525142001.GD4199 at enneenne.com> you wrote:> >> > Subject: ... All logos must be placed into the "logos" directory.> > Why?> > > ifeq ($(LOGO_BMP),)> > -LOGO_BMP= logos/denx.bmp> > +LOGO_BMP= denx.bmp> > Which problem is this supposed to fix? I don't see any advantage, but> I see the disadvantage that with your patch you cannot chose to place> your logo - say - in board/.../ any more.> > Best regards,> > Wolfgang Denk> > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de> Landing: a controlled mid-air collision with a planet.> > > > ------------------------------> > Message: 9> Date: Fri, 25 May 2007 16:29:13 +0200> From: Wolfgang Denk <wd at denx.de>> Subject: Re: [U-Boot-Users] [PATCH] LOGO: Allow define "LOGO_BMP" to> be globally defined.> To: Rodolfo Giometti <giometti at linux.it>> Cc: u-boot-users at lists.sourceforge.net> Message-ID: <20070525142913.0675C352B1F at atlas.denx.de>> Content-Type: text/plain; charset=ISO-8859-1> > In message <20070525142054.GE4199 at enneenne.com> you wrote:> > This allow developers to define per board logo file into main configuration> > file as follow:> > > > wwpc1100_config : unconfig> > @$(MKCONFIG) $(@:_config=) arm pxa wwpc1100> > @echo "LOGO_BMP = wwpc1100.bmp" >> include/config.mk> > I don't like this. This adds configuration information into Makefile,> where it does not belong.> > Please don't do this.> > > > --- a/Makefile> > +++ b/Makefile> > @@ -115,7 +115,7 @@ ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))> ...> > @@ -125,7 +125,7 @@ ifeq ($(ARCH),ppc)> > CROSS_COMPILE = powerpc-linux-> > endif> > ifeq ($(ARCH),arm)> > -CROSS_COMPILE = arm-eurotech-linux-> ^^^^^^^^^^^^^^^^^^^ What's that?> > +CROSS_COMPILE = arm-linux-> > Also, this patch does not apply.> > Best regards,> > Wolfgang Denk> > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de> "Just think of a computer as hardware you can program."> - Nigel de la Tierre> > > > ------------------------------> > -------------------------------------------------------------------------> This SF.net email is sponsored by DB2 Express> Download DB2 Express C - the FREE version of DB2 express and take> control of your XML. No limits. Just data. Click to get it now.> http://sourceforge.net/powerbar/db2/> > ------------------------------> > _______________________________________________> U-Boot-Users mailing list> U-Boot-Users at lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/u-boot-users> > > End of U-Boot-Users Digest, Vol 12, Issue 98> ********************************************
_________________________________________________________________
探索 Windows Vista 的世界
http://search.live.com/results.aspx?q=windows+vista&mkt=zh-cn&FORM=LIVSOP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070528/a795521c/attachment.htm

More information about the U-Boot mailing list