[U-Boot-Users] Newbie, once again

[Clemens Koller]

schardt schrieb:
> i'm still trying to run u-boot on the Xilinx4 FX12 MiniModul from Avnet.
> I think i'm on the wrong way....
> 
> the powerpc in the xilinx4 has 32MB DRAM (mapped at 0x0000_0000 to
> 0x03ff_ffff) and  4MB Flash (mapped at 0x0600_0000 to 0x063f_ffff). the
> integrated 16k block-ram is at 0xffff_c000 to 0xffff_ffff).
> 
> the last few days i tried to load the u-boot.srec image from flash into
> ram with the EDK srec-bootloader, and then run u-boot from ram. but this
> is not the right way, or ? The only output on the uartlite is :

http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM

Regards,

Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com