[U-Boot-Users] Final call: last minute fixes for 1.3.0 release ?

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Sun Nov 18 17:50:23 CET 2007


On 20:22 Sun 18 Nov     , Wolfgang Denk wrote:
Hi 
> * ARM builds for many boards OK, but there are problems that will
>   probably remain unfixed in 1.3.0:
> 
>   	mp2usb board:
> 
> 	usb_ohci.c: In function 'usb_lowlevel_init':
> 	usb_ohci.c:1846: error: 'AT91_USB_HOST_BASE' undeclared (first use in this function)
> 	usb_ohci.c:1846: error: (Each undeclared identifier is reported only once
> 	usb_ohci.c:1846: error: for each function it appears in.)
> 
I will send a patch about it
> 
> 	mx1ads board:
> 
> 	mx1ads.c: In function 'board_init':
> 	mx1ads.c:106: error: invalid lvalue in assignment
> 	mx1ads.c:107: error: invalid lvalue in assignment
> 
> 
> 	mx1fs2 board:
> 
> 	mx1fs2.c: In function 'logo_init':
> 	mx1fs2.c:75: error: invalid lvalue in assignment
> 
> 
> 
> 	VCMA9 board:
> 
> 	common/libcommon.a(usb.o): In function `usb_submit_int_msg':
> 	/home/wd/git/u-boot/work/common/usb.c:157: undefined reference to `submit_int_msg'
> 	common/libcommon.a(usb.o): In function `usb_control_msg':
> 	/home/wd/git/u-boot/work/common/usb.c:187: undefined reference to `submit_control_msg'
> 	common/libcommon.a(usb.o): In function `usb_bulk_msg':
> 	/home/wd/git/u-boot/work/common/usb.c:214: undefined reference to `submit_bulk_msg'
> 	common/libcommon.a(usb.o): In function `usb_init':
> 	/home/wd/git/u-boot/work/common/usb.c:109: undefined reference to `usb_lowlevel_init'
> 	common/libcommon.a(usb.o): In function `usb_stop':
> 	/home/wd/git/u-boot/work/common/usb.c:133: undefined reference to `usb_lowlevel_stop'
> 	common/libcommon.a(usb_storage.o): In function `usb_stor_CBI_get_status':
> 	/home/wd/git/u-boot/work/common/usb_storage.c:551: undefined reference to `submit_int_msg'
> 
I will send a patch about it too
> 
 
> * MIPS looks mostly OK, too, except here:
> 
> 	gth2 board:
> 
> 	lowlevel_init.S: Assembler messages:
> 	lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
>
If I'm not wrong Shinya send a patch a bout it.

Best Regards,
J.




More information about the U-Boot mailing list