[U-Boot-Users] MPC83xx Ethernet bug

[Andy Fleming]

On Nov 21, 2007 10:43 AM, Ben Warren <bwarren at qstreams.com> wrote:
> Joakim Tjernlund wrote:
> > Ping?
> >
> > Jocke
> >
> >
> ACK. Another reason it would be nice to have a PHY library that handles
> fixed connections. Stay tuned...

AGREED.


>
> >> -----Original Message-----
> >> From: u-boot-users-bounces at lists.sourceforge.net
> >> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf
> >> Of Joakim Tjernlund
> >> Sent: den 20 november 2007 08:52
> >> To: Liu Dave
> >> Cc: U-BOOT
> >> Subject: Re: [U-Boot-Users] MPC83xx Ethernet bug
> >>
> >> On Tue, 2007-11-20 at 13:29 +0800, Liu Dave wrote:
> >>
> >>> Hello Joakim,
> >>>
> >>> I did the test u-boot-1.3.0 wolfgang just released on mpc832xemds
> >>> board, I did not see the issue that you said.
> >>>
> >> But you did, see below
> >>
> >>
> >>> U-Boot 1.3.0 (Nov 20 2007 - 13:30:24) MPC83XX
> >>>
> >>> Reset Status:
> >>>
> >>> CPU:   e300c2, MPC8323E, Rev: 10 at 264 MHz, CSB:  132 MHz
> >>> Board: Freescale MPC832XEMDS
> >>> I2C:   ready
> >>> DRAM:  128 MB
> >>> FLASH: 16 MB
> >>> In:    serial
> >>> Out:   serial
> >>> Err:   serial
> >>> Net:   UEC: PHY is Davicom DM9161A (181b8a0)
> >>> FSL UEC0: Full Duplex
> >>> FSL UEC0: Speed 100BT
> >>> FSL UEC0: Link is up
> >>> UEC: PHY is Davicom DM9161A (181b8a0)
> >>> FSL UEC0, FSL UEC1
> >>>
> >> Here it is, the network i/f is initialized without any
> >> network activity.
> >> This adds several extra seconds before prompt or boot as the
> >> mdio code has big delays in it.
> >>
> >>
> >>> Hit any key to stop autoboot:  0
> >>> => ping 10.193.20.133
> >>>
> >> I should have been here as this is the first network operation.
> >>
> >>
> >>> Using FSL UEC0 device
> >>> host 10.193.20.133 is alive
> >>> =>
> >>>
> >>> Thanks,
> >>> Dave
> >>>
> >>>
> >>>> -----Original Message-----
> >>>> From: u-boot-users-bounces at lists.sourceforge.net
> >>>> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf
> >>>> Of Joakim Tjernlund
> >>>> Sent: 2007?11?19? 11:51 PM
> >>>> To: U-BOOT
> >>>> Subject: [U-Boot-Users] MPC83xx Ethernet bug
> >>>>
> >>>> Just tried to move my 83xx based board to latest u-boot and
> >>>> noticed an old problem. u-boot tries to bring up the
> >>>> ethernet at startup, not the first time it is used:
> >>>>
> >>>> U-Boot 1.3.0-rc3-g992742a5-dirty (Nov 19 2007 - 16:45:18)
> >>>>
> >>>> Reset Status: External/Internal Soft, External/Internal Hard
> >>>>
> >>>> CPU:   e300c2, MPC8323E, Rev: 10 at 266.664 MHz, CSB:  133 MHz
> >>>> Board: Transmode CU
> >>>> I2C reset sequence.
> >>>> I2C:   ready
> >>>> DRAM:
> >>>>    DDR RAM: 256 MB
> >>>> FLASH: 128 MB
> >>>> In:    serial
> >>>> Out:   serial
> >>>> Err:   serial
> >>>> Net:   read wrong value : mii_id 3,mii_reg 2, base e0102320
> >>>> read wrong value : mii_id 3,mii_reg 3, base e0102320
> >>>> UEC: PHY is Generic MII (ffffffff)
> >>>> read wrong value : mii_id 3,mii_reg 1, base e0102320
> >>>> read wrong value : mii_id 3,mii_reg 5, base e0102320
> >>>> FSL UEC0: Full Duplex
> >>>> FSL UEC0: Speed 100BT
> >>>> FSL UEC0: Link is up
> >>>> read wrong value : mii_id 4,mii_reg 2, base e0103320
> >>>> read wrong value : mii_id 4,mii_reg 3, base e0103320
> >>>> UEC: PHY is Generic MII (ffffffff)
> >>>> read wrong value : mii_id 4,mii_reg 1, base e0103320
> >>>> read wrong value : mii_id 4,mii_reg 1, base e0103320
> >>>> read wrong value : mii_id 4,mii_reg 5, base e0103320
> >>>> FSL UEC1: Full Duplex
> >>>> FSL UEC1: Speed 100BT
> >>>> FSL UEC1: Link is up
> >>>> FSL UEC0, FSL UEC1
> >>>> read wrong value : mii_id 3,mii_reg 1, base e0102320
> >>>>
> >>>> =>
> >>>>
> I don't know why the calls to init_phy() and phy_change() are in
> uec_initialize() instead of uec_init(). Moving them should at least
> prevent this stuff at boot-up.
>
> regards,
> Ben
>
> -------------------------------------------------------------------------
>
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>