[U-Boot-Users] [PATCH 03/18] Update MPC8544 DS config

Kumar Gala galak at kernel.crashing.org
Thu Nov 29 22:20:53 CET 2007


* Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
* Removed some misc environment setup
* Moved to using fdtfile & fdtaddr as fdt env var names
* Enabled CONFIG_CMDLINE_EDITING

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 include/configs/MPC8544DS.h |  107 +++++--------------------------------------
 1 files changed, 12 insertions(+), 95 deletions(-)

diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index fc0b9c2..aeac35a 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -422,6 +422,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
@@ -471,10 +472,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ETHADDR	00:E0:0C:02:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	00:E0:0C:02:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	00:E0:0C:02:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	00:E0:0C:02:03:FD
 #endif
 
 #define CONFIG_IPADDR	192.168.1.251
@@ -484,8 +481,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_BOOTFILE	8544ds/uImage.uboot
 #define CONFIG_UBOOTPATH	8544ds/u-boot.bin	/* TFTP server */
 
-#define CONFIG_SERVERIP	192.168.0.1
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP	192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK	255.255.0.0
 
 #define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
@@ -495,65 +492,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BAUDRATE	115200
 
-#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
-#define PCIE_ENV \
- "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
-	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcieerr=md ${a}020 1; md ${a}e00 e;"		\
-	"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"	\
-	"pci d.w $b.0 56 1;"			\
-	"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
- "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;"	\
-	"pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \
-	"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
-	"pci w $b.0 130 ffffffff\0" \
- "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
- "pcie1regs=setenv a e000a; run pciereg\0"	\
- "pcie2regs=setenv a e0009; run pciereg\0"	\
- "pcie3regs=setenv a e000b; run pciereg\0"	\
- "pcie1cfg=setenv b 3; run pciecfg\0" \
- "pcie2cfg=setenv b 5; run pciecfg\0" \
- "pcie3cfg=setenv b 0; run pciecfg\0" \
- "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0"	\
- "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0"	\
- "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0"	\
- "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"	\
- "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0"	\
- "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
-#else
-#define	PCIE_ENV ""
-#endif
-
-#if defined(CONFIG_PCI1)
-#define PCI_ENV \
- "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0"			\
- "pci1regs=setenv a e0008; run pcireg\0"	\
- "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
-	"pci d.w $b.0 56 1\0"			\
- "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
-	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"		\
- "pci1err=setenv a e0008; setenv b 7; run pcierr\0"		\
- "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
-#else
-#define	PCI_ENV ""
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
-#define ENET_ENV \
- "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
-	"md ${a}098 2\0" \
- "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
- "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
- "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
-	"echo mib;md ${a}680 31\0" \
- "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
- "enet1regs=setenv a e0024; run enetreg\0" \
- "enet3regs=setenv a e0026; run enetreg\0"
-#else
-#define ENET_ENV ""
-#endif
-
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
  "netdev=eth0\0"						\
  "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
@@ -566,29 +504,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "consoledev=ttyS0\0"				\
  "ramdiskaddr=2000000\0"			\
  "ramdiskfile=8544ds/ramdisk.uboot\0"		\
- "dtbaddr=c00000\0"				\
- "dtbfile=8544ds/mpc8544ds.dtb\0"		\
- "bdev=sda3\0"					\
- "eoi=mw e00400b0 0\0"				\
- "iack=md e00400a0 1\0"				\
- "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
-	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0"		\
- "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
- "guregs=setenv a e00e0; run gureg\0"		\
- "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0"		\
- "lawregs=md e0000c08 4b\0" \
- "lbcregs=md e0005000 36\0" \
- "dma0regs=md e0021100 12\0" \
- "dma1regs=md e0021180 12\0" \
- "dma2regs=md e0021200 12\0" \
- "dma3regs=md e0021280 12\0" \
- PCIE_ENV	\
- PCI_ENV	\
- ENET_ENV
-
+ "fdtaddr=c00000\0"				\
+ "fdtfile=8544ds/mpc8544ds.dtb\0"		\
+ "bdev=sda3\0"
 
 #define CONFIG_NFSBOOTCOMMAND		\
  "setenv bootargs root=/dev/nfs rw "	\
@@ -596,23 +514,22 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
-
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND		\
  "setenv bootargs root=/dev/ram rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $ramdiskaddr $ramdiskfile;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND		\
  "setenv bootargs root=/dev/$bdev rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $dtbaddr $dtbfile;"		\
- "bootm $loadaddr - $dtbaddr"
+ "tftp $fdtaddr $fdtfile;"		\
+ "bootm $loadaddr - $fdtaddr"
 
 #endif	/* __CONFIG_H */
-- 
1.5.3.4





More information about the U-Boot mailing list