[U-Boot-Users] 85xx pci problems

[Clemens Koller]

Hi, Robert!

robert lazarski schrieb:
> On Nov 30, 2007 9:46 AM, Kumar Gala <galak at kernel.crashing.org> wrote:
>>> We are putting the o-scope on the board to look for hardware issues.
>>> Any help on what to look for concerning PCI hardware issues or my TLB
>>> / device tree issues would be highly appreciated - we're running out
>>> of time!
>> maybe I missed it but what's the issue?
>>
>> - k
>>
> 
> No cards are recognized. We can, for example, put a Intel pro 100
> ethernet card into a PC and see it recognized via lspci.
 > Nothing we try shows any info for this card in dmesg or lspci, or any other card.

Make sure your clocks and resets are okay.
- Then put only one device after each other on the pci bus (if possible)
- check the IDSELects fit to the u-boot / kernel configuration
- check the INT{A,B,C,D} fits to the IRQn# mapping to the kernel / the correct IDSELs.

See the pci at e0008000 { ... } entry in the device tree.
This stuff has to fit to your hardware.

> We are looking for clues and another set of eyes to see if we have
> software or hardware issues, or some combination.

Yes, it's the combination ;-)

Regards,

Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com