[U-Boot-Users] [PATCH 5/6] TQM860M: adjust for doubled flash sector size.

[Martin Krause]

Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.

Signed-off-by: Martin Krause <martin.krause at tqs.de>
---
 include/configs/TQM860M.h |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 684b86f..fe3a2f0 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -69,9 +69,14 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM860M/uImage\0"				\
-	"fdt_addr=40080000\0"						\
-	"kernel_addr=400A0000\0"					\
+	"fdt_addr=400C0000\0"						\
+	"kernel_addr=40100000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=protect off 40000000 +${filesize};"			\
+		"erase 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"protect on 40000000 +${filesize}\0"			\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -172,7 +177,7 @@
 #define CFG_FLASH_BASE		0x40000000
 #define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
@@ -193,7 +198,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
 #define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
-- 
1.5.3.rc6.g1911