[U-Boot-Users] u-boot-1.1.6 :"How to use Hardware Diagnose Commands?

[Binay Kumar]

Hi,

I cross-compiled u-boot-1.1.6 with patch for BMW board(MPC-8245) as
well as Montavista Kernel(linux 2.6.10_mv1401).Running fine on board.

Now I want to test "POST-hardware Diagnose Commands like  watchgdog
Timer Test?How will I use these commands?

Waiting for your reply.

--------------Boot Message----------------

U-Boot 1.1.6 (Oct  4 2007 - 17:24:54)

CPU:   MPC8245 Revision 1.4 at 198.002 MHz: 16 kB I-Cache 16 kB D-Cache
Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
HELLO BINAY........
Built: Oct  4 2007 at 17:24:57
Local Bus at 99.001 MHz
DRAM:  256 MB
FLASH: 512 kB
In:    serial
Out:   serial
Err:   serial
DOC:   No DiskOnChip found
=>printenv
bootdelay=5
baudrate=9600
ethaddr=00:10:18:82:40:99
bootargs=root=/dev/nfs rw
nfsroot=192.168.11.6:/opt/montavista/pro/devkit/ppc/82xx/target/
nfsaddrs=192.168.11.32:192.168.11.6
filesize=3007b1
fileaddr=200000
netmask=255.255.255.0
ipaddr=192.168.11.32
serverip=192.168.11.6
gatewayip=192.168.11.1
stdin=serial
stdout=serial
stderr=serial

Environment size: 339/2044 bytes.

Thanks In advance
Binay