[U-Boot-Users] [Patch] Make MPC8266ADS compile again

[Jerry Van Baren]

runet at innovsys.com wrote:
> Make MPC8266ADS board compile again.
> Signed-off-by: Runet Torgersen <runet at innovsys.com>
> 
> diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
> index 14b041e..d392b98 100644
> --- a/include/configs/MPC8266ADS.h
> +++ b/include/configs/MPC8266ADS.h
> @@ -168,6 +168,7 @@
>  #undef CONFIG_CMD_MFSL
>  #undef CONFIG_CMD_MMC
>  #undef CONFIG_CMD_NAND
> +#undef CONFIG_CMD_ONENAND
>  #undef CONFIG_CMD_PCMCIA
>  #undef CONFIG_CMD_REISER
>  #undef CONFIG_CMD_SCSI
> @@ -177,6 +178,7 @@
>  #undef CONFIG_CMD_UNIVERSE
>  #undef CONFIG_CMD_USB
>  #undef CONFIG_CMD_XIMG
> +#undef CONFIG_CMD_AT91_SPIMUX
>  
>  /* Define a command string that is automatically executed when no character
>   * is read on the console interface withing "Boot Delay" after reset.

The *proper* fix is to delete the
#include <config_cmd_all.h>
and #define only the commands that actually are desired.

The simplest (and probably most proper) way to do this is actually to
#include <config_cmd_default.h>
and then add non-default commands that may be useful on the MPC8266ADS 
board.

The current configuration is legacy from the old bit-mapped 
configuration ways plus a very poor choice to do the "all-subtractive" 
method of selecting commands.

With the "all-subtractive" method, new commands will *FOREVER* be 
breaking the board, resulting in patches and/or bit rot forever.  Please 
fix it once, right, and we will all thank you forever.

TIA,
gvb