[U-Boot-Users] [PATCH] TQM5200: fix spurious characters on second serial interface

[Martin Krause]

With this patch PSC3 is configured as UART. This is done, because if
the pins of PSC3 are not configured at all (-> all pins are GPI),
due to crosstalk, spurious characters may be send over the RX232_2_TXD
signal line.

Signed-off-by: Martin Krause <martin.krause at tqs.de>
---
If I receive no negative comments to this patch, I will pick it to the
u-boot-tq-group repository and send a pull request.

Best regards,
Martin

 include/configs/TQM5200.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index d553404..c3f16f5 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -547,7 +547,7 @@
 #  if defined (CONFIG_TQM5200_REV100)
 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 #  else/* TQM5200 REV200 and above */
-#   define CFG_GPS_PORT_CONFIG	0x91500004
+#   define CFG_GPS_PORT_CONFIG	0x91500404
 #  endif
 # endif
 #elif defined (CONFIG_FO300)