[U-Boot-Users] help:error occured when 'saveenv'

xbc_5419 xbc_5419 at 163.com
Tue Oct 23 14:19:30 CEST 2007


hi,

i have been trying to port the u-boot 1.2.0 to my board which based on the at91rm9200.

when running the 'saveenv' ,it promted out 

       "Saving Environment to Flash...
        Error: start address not on sector boundary"

my flash is MT-28F128J3, which has 128 128KB(x16bit) erase blocks,in the include/configs/myboard.h  i defined the 
       #define PHYS_FLASH_1   0x10000000
       #define PHYS_FLASH_SIZE   0x1000000  /* 16 megs main flash */
       #define CFG_FLASH_BASE   PHYS_FLASH_1
       #define CFG_MAX_FLASH_BANKS  1
       #define CFG_MAX_FLASH_SECT  128

       #define CFG_ENV_IS_IN_FLASH  1
       #ifdef CONFIG_SKIP_LOWLEVEL_INIT
       #define CFG_ENV_ADDR   (PHYS_FLASH_1 + 0x60000)  /* after u-boot.bin */
       #define CFG_ENV_SIZE   0x10000 /* sectors are 64K here */
       #else
       #define CFG_ENV_ADDR   (PHYS_FLASH_1 + 0xe000)  /* between boot.bin and u-boot.bin.gz */
       #define CFG_ENV_SIZE   0x2000  /* 0x8000 */
       #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

what can i do to fix it ...??
Any help will be appreciated....thanks you...


Best Regards

Jack Xu
2007-10-23
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071023/34cedeea/attachment.htm 


More information about the U-Boot mailing list