[U-Boot-Users] Configuring Spansion flash

[Yasothabalan Ramaswamy-TLS,Chennai]

I am using I2C EEPROM.

Ben I am having another issue now.

Here in my board I have two Ethernet ports; So now I have to set two
different IP addresses for these ports.

As when the U-Boot prompt comes up we can set the IP address as,

=> set ipaddr 10.128.19.1
=> set ethaddr aa:bb:cc:ee:ff:gg

So above setting is valid only for single Ethernet port.

My doubt how to set IP address for another Ethernet port or what is the
method to do that? 

{How can I set two different IP addresses for these two ports?
[Two different IPs
Two different GATEWAYs
Two different SERVERIPs]}



Regards,
Yasotha Balan R

 

-----Original Message-----
From: Ben Warren [mailto:bwarren at qstreams.com] 
Sent: Tuesday, September 18, 2007 8:46 PM
To: Yasothabalan Ramaswamy-TLS,Chennai
Cc: Jerry Van Baren; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] Configuring Spansion flash

Yasothabalan Ramaswamy-TLS,Chennai wrote:
> Thanks Ben and Jerry I have fixed the my flash issued.
>
> Is there any way to test the EEPROM through Uboot code?
>
> Thanks in advance.
>
> Regards,
> Yasotha Balan R
>
>   
Probably. What kind of EEPROM is it?

regards,
Ben

DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------