[U-Boot-Users] [PATCH] Fix fdt set command to conform to dts spec

[Jerry Van Baren]

Andy Fleming wrote:
> The fdt set command was treating properties specified as <00> and <0011>
> as byte streams, rather than as an array of cells.  As we already have
> syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
> we should use the <> syntax to describe arrays of cells, which are always
> 32-bits per element.  If we imagine this likely (IMHO) scenario:
> 
>> fdt set /ethernet-phy at 1 reg <1>
> 
> With the old code, this would create a bad fdt, since the reg cell would be
> made to be one byte in length.  But the cell must be 4 bytes, so this would
> break mysteriously.

Confirmed, my bad.  Applied to the u-boot-fdt repo.

Thanks,
gvb