[U-Boot-Users] FDT: missing stdout-path

[Scott Wood]

On Thu, Apr 03, 2008 at 11:56:08AM -0400, Bill Cook wrote:
> Hello experts,
> 
> With U-Boot-1.3.2 and a Freescale MPC8313ERDB,
> I'm getting this message from bootm
> 
> ...
>    Booting using the fdt at 0xfc700000
>    Loading Ramdisk to 07ca1000, end 07f419bf ... OK
>    Loading Device Tree to 007fc000, end 007fefff ... OK
>    WARNING: could not set linux,stdout-path FDT_ERR_NOTFOUND.
>    ERROR: /chosen node create failed - must RESET the board to recover.
>    Resetting the board.
> 
>    U-Boot 1.3.2 (Apr  2 2008 - 10:02:55) MPC83XX
> 
>    Reset Status: Software Hard, External/Internal Soft, External/Internal
> Hard
> 
>    CPU:   e300c3, MPC8313E, Rev: 10 at 333.333 MHz, CSB:  166 MHz
> ...
> 
> What do I need to add to DTS file or u-boot environment to make this go?

You probably need serial0, serial1, etc. aliases.  See the device trees
in head-of-tree Linux.

-Scott