[U-Boot-Users] AT91SAM9260EK with KS8721 PHY

[Stelian Pop]

Le lundi 07 avril 2008 à 16:14 +0200, Sander Vermin a écrit :

> > Did you test it as is ? From what I see in the code, the macb driver
> > doesn't care much about the PHY type...

> I did test it, u-boot says no PHY present. I had to change from RMII 
> mode to MII mode due to my hardware design.

Ok, so there must be something else in the code which was changed to
support your PHY (look for some "isolate" setting like Eric said).
You'll need to find out what it is...

-- 
Stelian Pop <stelian at popies.net>