[U-Boot-Users] [PATCH] PPC440 Power Management Registers

[Eugene O'Brien]

Hello Stefan,

Well I am still trying to master GIT and the patch reporting process. On
the last try I used the git diff command to create the patch. This time
I created a separate U-Boot tree and committed this one change into it
and used git-format-patch to generate the attached file.
 
Hopefully this approach meets your needs.

Regards,
Eugene

-----Original Message-----
From: Stefan Roese [mailto:sr at denx.de] 
Sent: April 11, 2008 12:31 AM
To: u-boot-users at lists.sourceforge.net
Cc: Wolfgang Denk; Eugene O'Brien
Subject: Re: [U-Boot-Users] [PATCH] PPC440 Power Management Registers

On Thursday 10 April 2008, Wolfgang Denk wrote:
> In message <200804101533.14599.sr at denx.de> you wrote:
> > Unfortunately now your patch is line wrapped. And even if it wasn't
line
> > wrapped, it couldn't be applied using git-am (which makes life so
much
> > easier for me) because of the lines above and below the real patch.
>
> This is not a big problem; "git-am -i" will allow you to edit the
> commit message if needed.

Right. But it would be better if it could be avoided. Less work for us 
custodians. ;)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-ppc4xx-Fix-power-mgt-definitions-for-PPC440.patch
Type: application/octet-stream
Size: 1372 bytes
Desc: 0001-ppc4xx-Fix-power-mgt-definitions-for-PPC440.patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20080411/6a27df0a/attachment.obj