[U-Boot-Users] [PATCH v2] IDE: fix bug in reset sequence

[Martin Krause]

u-boot-users-bounces at lists.sourceforge.net wrote on :
> In message <20080404130906.24594.85188.stgit at tq-sewsrv-4.tq-net.de>
> you wrote: 
> > According to the ata (ata5) specification the RESET- signal
> > shall be asserted for at least 25 us. Without this patch,
> > the RESET- signal is asserted on some boards for only < 1 us
> > (e. g. on the TQM5200). This patch adds a general delay of
> > 25 us to the RESET- signal.
> 
> Already applied.
> 
> If you want to send follow-ups to previous postings. please make sure
> to keep the reference information intact. As is, it was impossible to

I'm sorry for that! I tried to mark this patch as follup-up by the
"v2" in the Subject, but I see, that this was not sufficient.

What do you mean with reference information? The message id?
Does anyone know, how I can re-send a modified patch with git (or 
stacked git which I use normally) without generating a new message ID 
(and without copy- and pasteing the new patch in the reply email)?

Best Regards,
Martin Krause

--
TQ-Systems GmbH
Muehlstrasse 2, Gut Delling, D-82229 Seefeld
Amtsgericht Muenchen, HRB 105 018, UST-IdNr. DE 811 607 913
Geschaeftsfuehrer: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Ruediger Stahl
http://www.tq-group.com