[U-Boot-Users] [PATCH] 4xx: Update CPU strapping for PMC440 boards

[Matthias Fuchs]

This patch removes the temporary 'test' strapping option
of the sbe command. The '667' strapping option now uses
a PLB/PCI divider of 3.

Signed-off-by: Matthias Fuchs <matthias.fuchs at esd-electronics.com>
---
 board/esd/pmc440/cmd_pmc440.c |   13 +------------
 1 files changed, 1 insertions(+), 12 deletions(-)

diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index e9e9746..ef54e67 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -293,20 +293,9 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
 			sdsdp[2]=0x40082350;
 			sdsdp[3]=0x0d050000;
 		} else if (!strcmp(argv[1], "667")) {
-			/* PLB=133MHz, PLB/PCI=4 */
+			/* PLB=133MHz, PLB/PCI=3 */
 			printf("Bootstrapping for 667MHz\n");
 			sdsdp[0]=0x8778a256;
-			sdsdp[1]=0x0947a030;
-			sdsdp[2]=0x40082350;
-			sdsdp[3]=0x0d050000;
-		} else if (!strcmp(argv[1], "test")) {
-			/*
-			 * TODO: this will replace the 667 MHz config above.
-			 * But it needs some more testing on a real 667 MHz CPU.
-			 */
-			printf("Bootstrapping for test"
-			       " (667MHz PLB=133PLB PLB/PCI=3)\n");
-			sdsdp[0]=0x8778a256;
 			sdsdp[1]=0x095fa030;
 			sdsdp[2]=0x40082350;
 			sdsdp[3]=0x0d050000;
-- 
1.5.3