[U-Boot-Users] ppc440: EBC 32-bit bus width setting

[Stefan Roese]

On Wednesday 23 April 2008, Andrew E. Mileski wrote:
> This affects EBC_BXCR_BW_32BIT defined in include/ppc440.h
>
> According to the AMCC 440EPx User Manual (v1.14), pg 591, figure 22-18,
> BW (bits 17:18) should be 10 for a 32-bit bus width.  This is also
> repeated for the NAND controller, section 23.4.5 on pg 600.
>
> According to the IBM 440GX User's Manual (November 21, 2003), pg 1037,
> figure 30-23, BW (bits 17:18) should be 11.  A rather old manual.
>
> Can others help confirm the settings for these processors and other 440
> family members.

I suspect that both manuals are correct and the register bit setting are 
incompatible. Best would be if you send a patch to fix this in U-Boot. 
Something like:

#if defined(CONFIG_440GX)
#define EBC_BXCR_BW_32BIT               0x00006000
#else
#define EBC_BXCR_BW_32BIT               0x00004000
#endif

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================