[U-Boot-Users] [PATCH 1/2] Add the Harris QUAD100HD AMCC 405EP-based board.

[Stefan Roese]

On Thursday 24 April 2008, Heiko Schocher wrote:
> > Add the Harris QUAD100HD AMCC 405EP-based board.
> >
> > Signed-off-by: Gary Jennejohn <garyj at denx.de>
> > ---
> >  MAINTAINERS                 |    4 +
> >  MAKEALL                     |    1 +
> >  Makefile                    |    3 +
> >  board/quad100hd/Makefile    |   51 ++
> >  board/quad100hd/config.mk   |   24 +
> >  board/quad100hd/flash.c     | 1097
> > +++++++++++++++++++++++++++++++++++++++++++
>
> Do you really need a boardspecific flash driver? Are these flashes not
> CFI compatible?

Yes, I had the some question in mind. Which FLASH chips are used on the board?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================