[U-Boot-Users] [PATCH 2/2] Add the Harris QUAD100HD AMCC 405EP-based board.

[Detlev Zundel]

Hi Gary,

> On Thu, 24 Apr 2008 08:27:20 +0200
> Stefan Roese <sr at denx.de> wrote:
>
>> > +#define CONFIG_IPADDR		192.168.1.67
>> > +#define CONFIG_SERVERIP		192.168.1.50
>> > +#define CONFIG_GATEWAYIP	192.168.1.1
>> > +#define CONFIG_NETMASK		255.255.255.0
>> > +#define CONFIG_ETHADDR 		00:01:02:03:04:05
>> > +#define CONFIG_ETH1ADDR		00:01:02:03:04:06
>> 
>> Are you really sure that you want to provide default MAC-addresses? We usually 
>> don't do this.
>> 
>
> The customer had CONFIG_ETHADDR set in PPCBoot.  I added CONFIG_ETH1ADDR
> analog to that, since I have CONFIG_NET_MULTI defined in quad100hd.h.
>
> I personally don't care either way and have no problem with removing them.
> Don't know what the customer would have to say about that.

Mac addresses (not that those are worth of that title) should not go
into stock U-Boot source.  This only calls for lots of trouble as
discussed n+1 times.  The customer will have to assign correct addresses
anyway, so there is no reason to set a bad example in source others will
copy from.

Cheers
  Detlev

-- 
A GNU manual  should give a  good introduction to a beginner reading
through from the start, and should also provide all the details that
hackers want.                       --- GNU Coding Standards
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de