[U-Boot-Users] [PATCH v2 2/2] i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.

[Magnus Lilja]

Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
contacts instead of only the first 256 ones as is the case prior to
this patch.

Add missing MUX_* macros and update board files to use the new macros.

Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
---
Changes from first version:
Renamed helper macro in mx31-regs.h to IOMUX_MODE since that's the
name used in imx31 code in Linux 2.6.26.
Split one macro into two lines in order to fit within 80 columns.

 board/imx31_litekit/imx31_litekit.c   |   14 +++++++-------
 board/mx31ads/mx31ads.c               |   14 +++++++-------
 cpu/arm1136/mx31/generic.c            |    4 ++--
 include/asm-arm/arch-mx31/mx31-regs.h |   33 ++++++++++++++++++++++++---------
 4 files changed, 40 insertions(+), 25 deletions(-)

diff --git a/board/imx31_litekit/imx31_litekit.c b/board/imx31_litekit/imx31_litekit.c
index 8cbc26e..cb3e174 100644
--- a/board/imx31_litekit/imx31_litekit.c
+++ b/board/imx31_litekit/imx31_litekit.c
@@ -53,13 +53,13 @@ int board_init (void)
 	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 
 	/* SPI2 */
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS2);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SCLK);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SPI_RDY);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MOSI);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MISO);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS0);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS1);
+	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
 
 	/* start SPI2 clock */
 	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
diff --git a/board/mx31ads/mx31ads.c b/board/mx31ads/mx31ads.c
index b6928fc..c24c47c 100644
--- a/board/mx31ads/mx31ads.c
+++ b/board/mx31ads/mx31ads.c
@@ -58,13 +58,13 @@ int board_init (void)
 	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 
 	/* SPI2 */
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS2);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SCLK);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SPI_RDY);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MOSI);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MISO);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS0);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS1);
+	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
 
 	/* start SPI2 clock */
 	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
diff --git a/cpu/arm1136/mx31/generic.c b/cpu/arm1136/mx31/generic.c
index 29c08c1..dc031c9 100644
--- a/cpu/arm1136/mx31/generic.c
+++ b/cpu/arm1136/mx31/generic.c
@@ -81,12 +81,12 @@ void mx31_gpio_mux(unsigned long mode)
 {
 	unsigned long reg, shift, tmp;
 
-	reg = IOMUXC_BASE + (mode & 0xfc);
+	reg = IOMUXC_BASE + (mode & 0x1fc);
 	shift = (~mode & 0x3) * 8;
 
 	tmp = __REG(reg);
 	tmp &= ~(0xff << shift);
-	tmp |= ((mode >> 8) & 0xff) << shift;
+	tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
 	__REG(reg) = tmp;
 }
 
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
index abe61f0..b04a718 100644
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -126,17 +126,32 @@
 #define MUX_CTL_CSPI2_SS2	0x87
 #define MUX_CTL_CSPI2_MOSI	0x8b
 
-/* The modes a specific pin can be in
- * these macros can be used in mx31_gpio_mux() and have the form
- * MUX_[contact name]__[pin function]
+/*
+ * Helper macros for the MUX_[contact name]__[pin function] macros
  */
-#define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
-#define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
-#define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_CTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+#define IOMUX_MODE_POS 9
+#define IOMUX_MODE(contact, mode) (((mode) << IOMUX_MODE_POS) | (contact))
 
-#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SDA ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+/*
+ * These macros can be used in mx31_gpio_mux() and have the form
+ * MUX_[contact name]__[pin function]
+ */
+#define MUX_RXD1__UART1_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD1, MUX_CTL_FUNC)
+#define MUX_TXD1__UART1_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD1, MUX_CTL_FUNC)
+#define MUX_RTS1__UART1_RTS_B	IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
+#define MUX_CTS1__UART1_CTS_B	IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI2_MOSI__CSPI2_MOSI IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI2_MISO__CSPI2_MISO IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B \
+	IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
+#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
 
 /*
  * Memory regions and CS