[U-Boot-Users] [PATCH] (Resubmit) ADD ARM AMBA PL031 RTC Support

[Gururaja Hebbar K R]

- Add ARM AMBA PL031 RTC Support

Signed-off-by: Gururaja Hebbar <gururajakr at sanyo.co.in>
---
 drivers/rtc/Makefile    |    1 +
 drivers/rtc/rtc_pl031.c |  123 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 124 insertions(+), 0 deletions(-)
 create mode 100755 drivers/rtc/rtc_pl031.c

diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2e0c118..f888a31 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -56,6 +56,7 @@ COBJS-y += rs5c372.o
 COBJS-y += rx8025.o
 COBJS-y += s3c24x0_rtc.o
 COBJS-y += x1205.o
+COBJS-y += rtc_pl031.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/rtc/rtc_pl031.c b/drivers/rtc/rtc_pl031.c
new file mode 100755
index 0000000..0ad5e9c
--- /dev/null
+++ b/drivers/rtc/rtc_pl031.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2008
+ * Gururaja Hebbar gururajakr at sanyo.co.in
+ *
+ * reference linux-2.6.20.6/drivers/rtc/rtc-pl031.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+#if defined(CONFIG_RTC_PL031) && defined(CONFIG_CMD_DATE)
+
+#ifndef CFG_RTC_PL031_BASE
+#error CFG_RTC_PL031_BASE is not defined!
+#endif
+
+/*
+ * Register definitions
+ */
+#define	RTC_DR		0x00	/* Data read register */
+#define	RTC_MR		0x04	/* Match register */
+#define	RTC_LR		0x08	/* Data load register */
+#define	RTC_CR		0x0c	/* Control register */
+#define	RTC_IMSC	0x10	/* Interrupt mask and set register */
+#define	RTC_RIS		0x14	/* Raw interrupt status register */
+#define	RTC_MIS		0x18	/* Masked interrupt status register */
+#define	RTC_ICR		0x1c	/* Interrupt clear register */
+
+#define RTC_CR_START	(1 << 0)
+
+#define	RTC_WRITE_REG(addr, val) \
+			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)) = (val))
+#define	RTC_READ_REG(addr)	\
+			(*(volatile unsigned int *)(CFG_RTC_PL031_BASE + (addr)))
+
+static int pl031_initted = 0;
+
+/* Enable RTC Start in Control register*/
+void rtc_init(void)
+{
+	RTC_WRITE_REG(RTC_CR, RTC_CR_START);
+
+	pl031_initted = 1;
+}
+
+/*
+ * Reset the RTC. We set the date back to 1970-01-01.
+ */
+void rtc_reset(void)
+{
+	RTC_WRITE_REG(RTC_LR, 0x00);
+	if(!pl031_initted)
+		rtc_init();
+}
+
+/*
+ * Set the RTC
+*/
+void rtc_set(struct rtc_time *tmp)
+{
+	unsigned long tim;
+
+	if(!pl031_initted)
+		rtc_init();
+
+	if (tmp == NULL) {
+		puts("Error setting the date/time\n");
+		return;
+	}
+
+	/* Calculate number of seconds this incoming time represents */
+	tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
+	                tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	RTC_WRITE_REG(RTC_LR, tim);
+}
+
+/*
+ * Get the current time from the RTC
+ */
+int rtc_get(struct rtc_time *tmp)
+{
+	ulong tim;
+
+	if(!pl031_initted)
+		rtc_init();
+
+	if (tmp == NULL) {
+		puts("Error getting the date/time\n");
+		return -1;
+	}
+
+	tim = RTC_READ_REG(RTC_DR);
+
+	to_tm (tim, tmp);
+
+	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	return 0;
+}
+
+#endif
-- 
1.5.6.4