[U-Boot-Users] [PATCH 7/7 v3] ARM: Add support for S3C6400 based SMDK6400 board
Guennadi Liakhovetski
lg at denx.de
Mon Aug 4 14:46:21 CEST 2008
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Ported from u-boot-1.1.6 version by Samsung.
Signed-off-by: Guennadi Liakhovetski <lg at denx.de>
---
MAKEALL | 1 +
Makefile | 17 ++
board/samsung/smdk6400/Makefile | 54 +++++
board/samsung/smdk6400/config.mk | 30 +++
board/samsung/smdk6400/lowlevel_init.S | 316 ++++++++++++++++++++++++++++
board/samsung/smdk6400/smdk6400.c | 130 ++++++++++++
board/samsung/smdk6400/u-boot-nand.lds | 62 ++++++
include/configs/smdk6400.h | 304 ++++++++++++++++++++++++++
nand_spl/board/samsung/smdk6400/Makefile | 106 ++++++++++
nand_spl/board/samsung/smdk6400/config.mk | 40 ++++
nand_spl/board/samsung/smdk6400/u-boot.lds | 61 ++++++
11 files changed, 1121 insertions(+), 0 deletions(-)
create mode 100644 board/samsung/smdk6400/Makefile
create mode 100644 board/samsung/smdk6400/config.mk
create mode 100644 board/samsung/smdk6400/lowlevel_init.S
create mode 100644 board/samsung/smdk6400/smdk6400.c
create mode 100644 board/samsung/smdk6400/u-boot-nand.lds
create mode 100644 include/configs/smdk6400.h
create mode 100644 nand_spl/board/samsung/smdk6400/Makefile
create mode 100644 nand_spl/board/samsung/smdk6400/config.mk
create mode 100644 nand_spl/board/samsung/smdk6400/u-boot.lds
diff --git a/MAKEALL b/MAKEALL
index ee83cca..a3ed47d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -515,6 +515,7 @@ LIST_ARM11=" \
imx31_litekit \
imx31_phycore \
mx31ads \
+ smdk6400 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index b104617..0c5b8a6 100644
--- a/Makefile
+++ b/Makefile
@@ -2677,6 +2677,23 @@ mx31ads_config : unconfig
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+#########################################################################
+## ARM1176 Systems
+#########################################################################
+smdk6400_noUSB_config \
+smdk6400_config : unconfig
+ @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
+ @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
+ echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
+ $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \
+ else \
+ echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
+ $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \
+ fi
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
#========================================================================
# i386
#========================================================================
diff --git a/board/samsung/smdk6400/Makefile b/board/samsung/smdk6400/Makefile
new file mode 100644
index 0000000..d35dc8b
--- /dev/null
+++ b/board/samsung/smdk6400/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := smdk6400.o
+SOBJS := lowlevel_init.o
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+#.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+# $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk
new file mode 100644
index 0000000..298d387
--- /dev/null
+++ b/board/samsung/smdk6400/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+#
+# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+
+# On SMDK6400 we use the 64 MB SDRAM bank at
+#
+# 0x50000000 to 0x58000000
+#
+# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000
+#
+# we load ourselves to 0x57e00000 without MMU
+# with MMU, load address is changed to 0xc7e00000
+#
+# download area is 0x5000c000
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
new file mode 100644
index 0000000..034c810
--- /dev/null
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -0,0 +1,316 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+#include <s3c6400.h>
+
+#ifdef CONFIG_SERIAL1
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
+#elif defined(CONFIG_SERIAL2)
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
+#else
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
+#endif
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ mov r12, lr
+
+ /* LED on only #8 */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x55540000
+ str r1, [r0, #GPNCON_OFFSET]
+
+ ldr r1, =0x55555555
+ str r1, [r0, #GPNPUD_OFFSET]
+
+ ldr r1, =0xf000
+ str r1, [r0, #GPNDAT_OFFSET]
+
+ /* Disable Watchdog */
+ ldr r0, =0x7e000000 @0x7e004000
+ orr r0, r0, #0x4000
+ mov r1, #0
+ str r1, [r0]
+
+ /* External interrupt pending clear */
+ ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/
+ ldr r1, [r0]
+ str r1, [r0]
+
+ ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
+ ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
+
+ /* Disable all interrupts (VIC0 and VIC1) */
+ mvn r3, #0x0
+ str r3, [r0, #oINTMSK]
+ str r3, [r1, #oINTMSK]
+
+ /* Set all interrupts as IRQ */
+ mov r3, #0x0
+ str r3, [r0, #oINTMOD]
+ str r3, [r1, #oINTMOD]
+
+ /* Pending Interrupt Clear */
+ mov r3, #0x0
+ str r3, [r0, #oVECTADDR]
+ str r3, [r1, #oVECTADDR]
+
+ /* init system clock */
+ bl system_clock_init
+
+#ifndef CONFIG_NAND_SPL
+ /* for UART */
+ bl uart_asm_init
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+ /* simple init for NAND */
+ bl nand_asm_init
+#endif
+
+ bl mem_ctrl_asm_init
+
+/* Wakeup support. Don't know if it's going to be used, untested. */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+ ldr r1, [r0]
+ bic r1, r1, #0xfffffff7
+ cmp r1, #0x8
+ beq wakeup_reset
+
+1:
+ mov lr, r12
+ mov pc, lr
+
+wakeup_reset:
+
+ /* Clear wakeup status register */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
+ ldr r1, [r0]
+ str r1, [r0]
+
+ /* LED test */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x3000
+ str r1, [r0, #GPNDAT_OFFSET]
+
+ /* Load return address and jump to kernel */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
+ /* r1 = physical address of s3c6400_cpu_resume function */
+ ldr r1, [r0]
+ /* Jump to kernel (sleep-s3c6400.S) */
+ mov pc, r1
+ nop
+ nop
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */
+
+#ifdef CONFIG_SYNC_MODE
+ ldr r1, [r0, #OTHERS_OFFSET]
+ mov r2, #0x40
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldr r2, =0x80
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+check_syncack:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ ldr r2, =0xf00
+ and r1, r1, r2
+ cmp r1, #0xf00
+ bne check_syncack
+#else /* ASYNC Mode */
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /*
+ * This was unconditional in original Samsung sources, but it doesn't
+ * seem to make much sense on S3C6400.
+ */
+#ifndef CONFIG_S3C6400
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0xC0
+ orr r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+
+wait_for_async:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ and r1, r1, #0xf00
+ cmp r1, #0x0
+ bne wait_for_async
+#endif
+
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+
+ mov r1, #0xff00
+ orr r1, r1, #0xff
+ str r1, [r0, #APLL_LOCK_OFFSET]
+ str r1, [r0, #MPLL_LOCK_OFFSET]
+
+ /* Set Clock Divider */
+ ldr r1, [r0, #CLK_DIV0_OFFSET]
+ bic r1, r1, #0x30000
+ bic r1, r1, #0xff00
+ bic r1, r1, #0xff
+ ldr r2, =CLK_DIV_VAL
+ orr r1, r1, r2
+ str r1, [r0, #CLK_DIV0_OFFSET]
+
+ ldr r1, =APLL_VAL
+ str r1, [r0, #APLL_CON_OFFSET]
+ ldr r1, =MPLL_VAL
+ str r1, [r0, #MPLL_CON_OFFSET]
+
+ /* FOUT of EPLL is 96MHz */
+ ldr r1, =0x200203
+ str r1, [r0, #EPLL_CON0_OFFSET]
+ ldr r1, =0x0
+ str r1, [r0, #EPLL_CON1_OFFSET]
+
+ /* APLL, MPLL, EPLL select to Fout */
+ ldr r1, [r0, #CLK_SRC_OFFSET]
+ orr r1, r1, #0x7
+ str r1, [r0, #CLK_SRC_OFFSET]
+
+ /* wait at least 200us to stablize all clock */
+ mov r1, #0x10000
+1: subs r1, r1, #1
+ bne 1b
+
+ /* Synchronization for VIC port */
+#if defined(CONFIG_SYNC_MODE)
+ ldr r1, [r0, #OTHERS_OFFSET]
+ orr r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#elif !defined(CONFIG_S3C6400)
+ /* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+ mov pc, lr
+
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+ /* set GPIO to enable UART */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x220022
+ str r1, [r0, #GPACON_OFFSET]
+ mov pc, lr
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+/*
+ * NAND Interface init for SMDK6400
+ */
+nand_asm_init:
+ ldr r0, =ELFIN_NAND_BASE
+ ldr r1, [r0, #NFCONF_OFFSET]
+ orr r1, r1, #0x70
+ orr r1, r1, #0x7700
+ str r1, [r0, #NFCONF_OFFSET]
+
+ ldr r1, [r0, #NFCONT_OFFSET]
+ orr r1, r1, #0x07
+ str r1, [r0, #NFCONT_OFFSET]
+
+ mov pc, lr
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+/*
+ * MMU Table for SMDK6400
+ */
+
+ /* form a first-level section entry */
+.macro FL_SECTION_ENTRY base,ap,d,c,b
+ .word (\base << 20) | (\ap << 10) | \
+ (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1)
+.endm
+
+.section .mmudata, "a"
+ .align 14
+ /* the following alignment creates the mmu table at address 0x4000. */
+ .globl mmu_table
+mmu_table:
+ .set __base, 0
+ /* 1:1 mapping for debugging */
+ .rept 0xA00
+ FL_SECTION_ENTRY __base, 3, 0, 0, 0
+ .set __base, __base + 1
+ .endr
+
+ /* access is not allowed. */
+ .rept 0xC00 - 0xA00
+ .word 0x00000000
+ .endr
+
+ /* 128MB for SDRAM 0xC0000000 -> 0x50000000 */
+ .set __base, 0x500
+ .rept 0xC80 - 0xC00
+ FL_SECTION_ENTRY __base, 3, 0, 1, 1
+ .set __base, __base + 1
+ .endr
+
+ /* access is not allowed. */
+ .rept 0x1000 - 0xc80
+ .word 0x00000000
+ .endr
+#endif
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
new file mode 100644
index 0000000..77fd2c8
--- /dev/null
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+/* ------------------------------------------------------------------------- */
+#define CS8900_Tacs 0x0 /* 0clk address set-up */
+#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
+#define CS8900_Tacc 0xE /* 14clk access cycle */
+#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
+#define CS8900_Tah 0x4 /* 4clk address holding time */
+#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
+#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
+
+static inline void delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b"
+ : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+static void cs8900_pre_init(void)
+{
+ SROM_BW_REG &= ~(0xf << 4);
+ SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
+ SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
+ (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
+ (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
+}
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ cs8900_pre_init();
+
+ /* NOR-flash in SROM0 */
+
+ /* Enable WAIT */
+ SROM_BW_REG |= 4 | 8 | 1;
+
+ gd->bd->bi_arch_number = MACH_TYPE;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("Board: SMDK6400\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+ulong virt_to_phy_smdk6400(ulong addr)
+{
+ if ((0xc0000000 <= addr) && (addr < 0xc8000000))
+ return addr - 0xc0000000 + 0x50000000;
+ else
+ printf("do not support this address : %08lx\n", addr);
+
+ return addr;
+}
+#endif
+
+#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+void nand_init(void)
+{
+ nand_probe(CFG_NAND_BASE);
+ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
+ print_size(nand_dev_desc[0].totlen, "\n");
+}
+#endif
+
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = FLASH_CFI_16BIT;
+ info->chipwidth = FLASH_CFI_BY16;
+ info->interface = FLASH_CFI_X16;
+ return 1;
+ } else
+ return 0;
+}
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
new file mode 100644
index 0000000..132ab21
--- /dev/null
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1176/start.o (.text)
+ cpu/arm1176/s3c64xx/cpu_init.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .mmudata : { *(.mmudata) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
new file mode 100644
index 0000000..b5deaa7
--- /dev/null
+++ b/include/configs/smdk6400.h
@@ -0,0 +1,304 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ * Gary Jennejohn <gj at denx.de>
+ * David Mueller <d.mueller at elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */
+#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
+#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
+
+#define CFG_SDRAM_BASE 0x50000000
+
+/* input clock of PLL: SMDK6400 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#define CONFIG_MEMORY_UPPER_CODE
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/*
+ * Architecture magic and machine type
+ */
+#define MACH_TYPE 1270
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 1024 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
+#define CS8900_BASE 0x18800300
+#define CS8900_BUS16 1 /* follow the Linux driver */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_CMDLINE_EDITING
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NAND
+#if defined(CONFIG_BOOT_ONENAND)
+#define CONFIG_CMD_ONENAND
+#endif
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE 384 /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* memtest works on */
+#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
+
+#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* default load address */
+
+#define CFG_HZ 1000
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */
+
+/**********************************
+ Support Clock Settings
+ **********************************
+ Setting SYNC ASYNC
+ ----------------------------------
+ 667_133_66 X O
+ 533_133_66 O O
+ 400_133_66 X O
+ 400_100_50 O O
+ **********************************/
+
+/*#define CONFIG_CLK_667_133_66*/
+#define CONFIG_CLK_533_133_66
+/*
+#define CONFIG_CLK_400_100_50
+#define CONFIG_CLK_400_133_66
+#define CONFIG_SYNC_MODE
+*/
+
+/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CFG_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */
+
+#define CFG_FLASH_BASE 0x10000000
+#define CFG_MONITOR_BASE 0x00000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+/* AM29LV160B has 35 sectors, AM29LV800B - 19 */
+#define CFG_MAX_FLASH_SECT 40
+
+#define CONFIG_AMD_LV800
+#define CFG_FLASH_CFI 1 /* Use CFI parameters (needed?) */
+/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CFG_FLASH_LEGACY_512Kx16
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (5 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (5 * CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/*
+ * SMDK6400 board specific data
+ */
+
+#define CONFIG_IDENT_STRING " for SMDK6400"
+
+/* base address for uboot */
+#define CFG_PHY_UBOOT_BASE (CFG_SDRAM_BASE + 0x07e00000)
+/* total memory available to uboot */
+#define CFG_UBOOT_SIZE (1024 * 1024)
+
+#ifdef CONFIG_ENABLE_MMU
+#define CFG_MAPPED_RAM_BASE 0xc0000000
+#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
+ "bootm 0xc0018000"
+#else
+#define CFG_MAPPED_RAM_BASE CFG_SDRAM_BASE
+#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \
+ "bootm 0x50018000"
+#endif
+
+/* NAND U-Boot load and start address */
+#define CFG_UBOOT_BASE (CFG_MAPPED_RAM_BASE + 0x07e00000)
+
+#define CFG_ENV_OFFSET 0x0040000
+
+/* NAND configuration */
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x70200010
+#define NAND_MAX_CHIPS 1
+#define CFG_S3C_NAND_HWECC
+
+#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
+#define CFG_NAND_WP 1
+#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */
+#define CFG_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
+
+#define CFG_NAND_U_BOOT_DST CFG_PHY_UBOOT_BASE /* NUB load-addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* NUB start-addr */
+
+#define CFG_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
+
+/* NAND chip page size */
+#define CFG_NAND_PAGE_SIZE 2048
+/* NAND chip block size */
+#define CFG_NAND_BLOCK_SIZE (128 * 1024)
+/* NAND chip page per block count */
+#define CFG_NAND_PAGE_COUNT 64
+/* Location of the bad-block label */
+#define CFG_NAND_BAD_BLOCK_POS 0
+/* Extra address cycle for > 128MiB */
+#define CFG_NAND_5_ADDR_CYCLE
+
+/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
+#define CFG_NAND_ECCSIZE 2048 /* 512 */
+/* Number of ECC bytes per OOB */
+#define CFG_NAND_ECCBYTES 12 /* 3 */
+/* Number of ECC-blocks per NAND page */
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+/* Size of a single OOB region */
+#define CFG_NAND_OOBSIZE 64 /* 16 */
+/* Number of ECC bytes per page */
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+/* ECC byte positions */
+#define CFG_NAND_ECCPOS {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}
+
+/* Boot configuration (define only one of next 3) */
+#define CONFIG_BOOT_NAND
+/* None of these are currently implemented. Left from the original Samsung
+ * version for reference
+#define CONFIG_BOOT_NOR
+#define CONFIG_BOOT_MOVINAND
+#define CONFIG_BOOT_ONENAND
+*/
+
+#define CONFIG_NAND
+#define CONFIG_NAND_S3C64XX
+/* Unimplemented or unsupported. See comment above.
+#define CONFIG_ONENAND
+#define CONFIG_MOVINAND
+*/
+
+/* Settings as above boot configuration */
+#define CFG_ENV_IS_IN_NAND
+#define CONFIG_BOOTARGS "console=ttySAC,115200"
+#define CONFIG_EXTRA_ENV_SETTINGS "bootargs=" CONFIG_BOOTARGS
+
+#if !defined(CONFIG_ENABLE_MMU)
+#define CONFIG_CMD_USB 1
+#define CONFIG_USB_OHCI_NEW 1
+#define CFG_USB_OHCI_REGS_BASE 0x74300000
+#define CFG_USB_OHCI_SLOT_NAME "s3c6400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
+#define CFG_USB_OHCI_CPU_INIT 1
+#define LITTLEENDIAN 1 /* used by usb_ohci.c */
+
+#define CONFIG_USB_STORAGE 1
+#endif
+#define CONFIG_DOS_PARTITION 1
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU)
+# error "usb_ohci.c is currently broken with MMU enabled."
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile
new file mode 100644
index 0000000..ae9eb2a
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/Makefile
@@ -0,0 +1,106 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_NAND_SPL = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o cpu_init.o lowlevel_init.o
+COBJS = nand_boot.o nand_ecc.o s3c64xx.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/cpu/arm1176/start.S $@
+
+# from SoC directory
+$(obj)cpu_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/cpu/arm1176/s3c64xx/cpu_init.S $@
+
+# from board directory
+$(obj)lowlevel_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/samsung/smdk6400/lowlevel_init.S $@
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@
+
+# from drivers/mtd/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/nand_ecc.c $@
+
+$(obj)s3c64xx.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/samsung/smdk6400/config.mk b/nand_spl/board/samsung/smdk6400/config.mk
new file mode 100644
index 0000000..4b16230
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/config.mk
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Samsung S3C64xx Reference Platform (smdk6400) board
+
+# TEXT_BASE for SPL:
+#
+# On S3C64xx platforms the SPL is located in SRAM at 0.
+#
+# TEXT_BASE = 0
+
+include $(TOPDIR)/board/$(BOARDDIR)/config.mk
+
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 4096
+PAD_TO := $(shell expr $$[$(TEXT_BASE) + 4096])
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
new file mode 100644
index 0000000..1bf022c
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ cpu_init.o (.text)
+ nand_boot.o (.text)
+
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
--
1.5.4
More information about the U-Boot
mailing list