[U-Boot-Users] Increasing U-Boot partition size

[Jatin Sharma]

I have Freescale MPC8347. Can you confirm that I have to have U-Boot
start at 0xFFF00000?

Thanks,
Jatin

2008/8/4 Scott Wood <scottwood at freescale.com>:
> Jatin Sharma wrote:
>> After I posted this message, I learned the reset vector for the PPC
>> architecture lies at 0xFFF00100.
>
> Well, it depends on what kind of PPC chip...
>
>> Does it mean the u-boot has to start
>> at the address 0xFFF00000?
>
> Yes (or possibly zero, if the RCW is set appropriately).
>
>> If not, how can I let CPU know to look for
>> u-boot at this new address?
>
> You edit the VHDL/Verilog. :-)
>
> -Scott
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>