[U-Boot-Users] [PATCH] Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
Stefan Roese
sr at denx.de
Thu Aug 7 12:09:38 CEST 2008
On Wednesday 06 August 2008, Steven A. Falco wrote:
> The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the
> GPIO configuration to match the schematic, and also sets the sdr0_pfc1
> register to select the corresponding mode for the UARTs.
>
> board/amcc/sequoia/sequoia.c | 5 +++++
> include/configs/sequoia.h | 12 ++++++------
> 2 files changed, 11 insertions(+), 6 deletions(-)
>
> Signed-off-by: Steven A. Falco <sfalco at harris.com>
Applied to u-boot-ppc4xx repository. Thanks.
Note that your s-o-b line should be *above* the patch statistics. Did you
generate this patch using git-format-patch?
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the U-Boot
mailing list