[U-Boot-Users] [DNX#2006101142000031] [PATCH 1/2] Adding support for KS8993, KS8893, KS8 [...]

[DENX Support System]

Hello list,

inside the automatic U-Boot patch tracking system a follow up
to [DNX#2006101142000031] was entered through the web interface:

<snip>
> Hello Mirco,
> 
> We are using KS8893 Ethernet switch with BF527. Pls let me know from
> where I can get this driver for KS8893 Ethernet switch
> 
> Thanks,
> TEL
> 
> 
> DENX Support System wrote:
> > 
> > Hello list,
> > 
> > inside the automatic U-Boot patch tracking system a new ticket
> > [DNX#2006101142000031] was created:
> > 
> > <snip>
> >> Hi, 
> >> 
> >> this patch adds support for Micrel's switches KS8893 and KS8993 and for
> >> Micrel's PHYs KS8721 and KS8001. The drivers can be used with AT91RM9200
> >> based boards.
> >> 
> >> Using these drivers requires to apply the CONFIG_PHY_ADDR patch that was
> >> send to the list on 11.08.06.
> >> 
> >> Best Regards
> >> Mirco
> >> 
> >> Signed-off-by: Mirco Fuchs mircofuchs at web.de
> >> 
> >> CHANGELOG:
> >> 	- Add support for Micrel's switches (KS8893 and KS8993) und Micrel's
> >> PHYs (KS8721, KS8001) for AT91RM9200 based boards.
> >> 
> >> diff --git a/cpu/arm920t/at91rm9200/Makefile
> >> b/cpu/arm920t/at91rm9200/Makefile
> >> index 8d4e478..7d50c22 100644
> >> --- a/cpu/arm920t/at91rm9200/Makefile
> >> +++ b/cpu/arm920t/at91rm9200/Makefile
> >> @@ -25,8 +25,8 @@ include $(TOPDIR)/config.mk
> >>  
> >>  LIB	= $(obj)lib$(SOC).a
> >>  
> >> -COBJS	= bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
> >> -	  lxt972.o serial.o usb_ohci.o
> >> +COBJS	= bcm5221.o dm9161.o ether.o i2c.o interrupts.o ks8893.o \
> >> +	  ks8993.o ks8xx1.o lxt972.o serial.o usb_ohci.o
> >>  SOBJS	= lowlevel_init.o
> >>  
> >>  SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> >> diff --git a/cpu/arm920t/at91rm9200/ks8893.c
> >> b/cpu/arm920t/at91rm9200/ks8893.c
> >> new file mode 100644
> >> index 0000000..d79d064
> >> --- /dev/null
> >> +++ b/cpu/arm920t/at91rm9200/ks8893.c
> >> @@ -0,0 +1,272 @@
> >> +/*
> >> + * Driver for Micrel's KS8893 ethernet switch. The configuration of the
> >> switch
> >> + * uses the Serial Management Interface (SMI), modification of the
> >> + * MII-Management Interface.
> >> + * 
> >> + * (C) Copyright 2006
> >> + * Authors :
> >> + *	Udo Jakobza (jakobza at ftz-leipzig.de)
> >> + *	Mirco Fuchs (fuchs at ftz-leipzig.de)
> >> + *
> >> + * See file CREDITS for list of people who contributed to this
> >> + * project.
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License as
> >> + * published by the Free Software Foundation; either version 2 of
> >> + * the License, or (at your option) any later version.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License
> >> + * along with this program; if not, write to the Free Software
> >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> >> + * MA 02111-1307 USA
> >> + */
> >> + 
> >> +#include <at91rm9200_net.h>
> >> +#include <net.h>
> >> +#include <ks8893.h>
> >> +
> >> +#ifdef CONFIG_DRIVER_ETHER
> >> +
> >> +#if (CONFIG_COMMANDS & CFG_CMD_NET)
> >> +
> >> +/*
> >> + * Name:
> >> + *	ks8893_SmiReadPhy
> >> + * Description:ETHER_MD_CA_ADDR_MSK
</snip>

Your U-Boot support team