[U-Boot] [PATCH] TQM8xx{L, M}: try to normalize config files for TQM8xx? based board

wd at denx.de wd at denx.de
Sat Aug 9 23:23:56 CEST 2008


From: Wolfgang Denk <wd at denx.de>

- enable CFI driver where this was forgotten
- enable mtdparts support
- adjust default environment
etc.

Signed-off-by: Wolfgang Denk <wd at denx.de>
---
 include/configs/FPS850L.h  |   41 ++++++++++++++++++---
 include/configs/FPS860L.h  |   87 ++++++++++++++++++++++++++++++++++++++------
 include/configs/NSCU.h     |   40 ++++++++++++++------
 include/configs/TQM823L.h  |   27 +++++++++++++-
 include/configs/TQM823M.h  |   28 +++++++++++++-
 include/configs/TQM850L.h  |   27 +++++++++++++-
 include/configs/TQM850M.h  |   28 +++++++++++++-
 include/configs/TQM855L.h  |   28 +++++++++++++-
 include/configs/TQM855M.h  |   28 +++++++++++++-
 include/configs/TQM860L.h  |   24 +++++++++++-
 include/configs/TQM860M.h  |   26 +++++++++++--
 include/configs/TQM862L.h  |   28 +++++++++++++-
 include/configs/TQM862M.h  |   26 +++++++++++++-
 include/configs/TQM866M.h  |   29 ++++++++++++---
 include/configs/virtlab2.h |   40 +++++++++++++++------
 15 files changed, 440 insertions(+), 67 deletions(-)

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index e4b68ab..66db296 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"hostname=FPS850L\0"						\
+	"bootfile=FPS850L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=FPS850L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -106,10 +113,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -180,11 +191,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
@@ -194,6 +209,20 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index ed612c3..84607cc 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"hostname=FPS860L\0"						\
+	"bootfile=FPS860L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=FPS860L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -106,10 +113,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -180,11 +191,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
@@ -194,6 +209,20 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
@@ -306,9 +335,11 @@
 #define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
 #define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
-				 OR_SCY_5_CLK | OR_EHTR)
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
 #define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 #define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
@@ -337,12 +368,42 @@
 
 /*
  * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CFG_MAMR_PTA	98
 
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
 #define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
@@ -372,4 +433,6 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+#define CONFIG_SCC1_ENET
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 11e5c63..21d90c3 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -67,9 +67,16 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/NSCU/uImage\0"				\
+	"hostname=NSCU\0"						\
+	"bootfile=${hostname}/uImage\0"					\
 	"kernel_addr=40080000\0"					\
 	"ramdisk_addr=40180000\0"					\
+	"u-boot=${hostname}/u-image.bin\0"				\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -110,20 +117,24 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#if 0
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history
+*/
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
@@ -186,21 +197,26 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index d5a3c54..f807271 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823L/uImage\0"				\
+	"hostname=TQM823L\0"						\
+	"bootfile=TQM823L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM823L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -115,7 +122,9 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -124,6 +133,8 @@
 #endif
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
@@ -215,6 +226,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 40dc26b..431ae8c 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -69,10 +69,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823M/uImage\0"				\
+	"hostname=TQM823M\0"						\
+	"bootfile=TQM823M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM823M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -113,11 +120,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -210,6 +222,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 17afa89..7946c13 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM850L/uImage\0"				\
+	"hostname=TQM850L\0"						\
+	"bootfile=TQM850L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM850L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -104,11 +111,15 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
@@ -200,6 +211,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index becf82c..777776d 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -63,10 +63,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM850M/uImage\0"				\
+	"hostname=TQM850M\0"						\
+	"bootfile=TQM850M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM850M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -102,11 +109,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -199,6 +211,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 73d6583..0549cbd 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM855L/uImage\0"				\
+	"hostname=TQM855L\0"						\
+	"bootfile=TQM855L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM855L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -108,11 +115,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -204,6 +216,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 2696ea5..bc092b7 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM855M/uImage\0"				\
+	"hostname=TQM855M\0"						\
+	"bootfile=TQM855M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM855M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -141,12 +148,17 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -239,6 +251,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 576e3e2..065156f 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/uImage\0"				\
+	"hostname=TQM860L\0"						\
+	"bootfile=TQM860L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM860L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -110,6 +117,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -207,6 +215,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 00b7853..ff610bf 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -68,15 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860M/uImage\0"				\
+	"hostname=TQM860M\0"						\
+	"bootfile=TQM860M/uImage\0"					\
 	"fdt_addr=400C0000\0"						\
 	"kernel_addr=40100000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM860M/u-image.bin\0"					\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"update=protect off 40000000 +${filesize};"			\
-		"erase 40000000 +${filesize};"				\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
 		"cp.b 200000 40000000 ${filesize};"			\
-		"protect on 40000000 +${filesize}\0"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -115,10 +117,14 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -210,6 +216,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 6d2f91b..33ff8a9 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM862L/uImage\0"				\
+	"hostname=TQM862L\0"						\
+	"bootfile=TQM862L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM862L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -111,11 +118,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -207,6 +219,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 05395e0..1ec4431 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM862M/uImage\0"				\
+	"hostname=TQM862M\0"						\
+	"bootfile=TQM862M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM862M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -111,11 +118,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -208,6 +220,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index d033875..0cee9f4 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -80,15 +80,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM866M/uImage\0"				\
+	"hostname=TQM866M\0"						\
+	"bootfile=TQM866M/uImage\0"					\
 	"fdt_addr=400C0000\0"						\
 	"kernel_addr=40100000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM866M/u-image.bin\0"					\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"update=protect off 40000000 +${filesize};"			\
-		"erase 40000000 +${filesize};"				\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
 		"cp.b 200000 40000000 ${filesize};"			\
-		"protect on 40000000 +${filesize}\0"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -157,9 +159,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+#define CONFIG_NETCONSOLE
 
 
 /*
@@ -253,6 +260,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 6bb075d..54d9421 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
  * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,10 +37,6 @@
 #define CONFIG_VIRTLAB2		1	/* ...on a virtlab2 module	*/
 #define	CONFIG_TQM8xxL		1
 
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-#define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
-#endif
-
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -70,9 +66,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"hostname=virtlab2\0"						\
+	"bootfile=virtlab2/uImage\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	"u-boot=virtlab2/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -114,6 +118,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -122,15 +127,16 @@
 #endif
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#if 0
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
@@ -197,7 +203,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
@@ -214,6 +220,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-- 
1.5.6.1




More information about the U-Boot mailing list