[U-Boot] [PATCH] - Correct Invalid Timer Register Field Declaration
Gururaja Hebbar K R
gururajakr at sanyo.co.in
Fri Aug 15 11:23:03 CEST 2008
Hi,
I searched the Entire u-boot-1.3.4\ directory for "PTV_BIT" declaration & couldn't find any.
Rather MPUTIM_PTV_BIT is defined which is the correct declaration.
Below Patch Corrects the declaration of MPUTIM_PTV_MASK bit in both omap1510.h & omap730.h.
Kindly update me if i am wrong.
TIA
Regards
Gururaja
- Correct Invalid #define of MPUTIM_PTV_MASK for
omap1510 & omap730 register definition
MPUTIM_PTV_MASK is defined as
#define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
while it should have been
#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
- Below Patch corrects the same
Signed-off-by: Gururaja Hebbar <gururajakr at sanyo.co.in>
---
include/configs/omap1510.h | 2 +-
include/configs/omap730.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 6787b19..931560c 100755
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -482,7 +482,7 @@
/* CNTL_TIMER register bits */
#define MPUTIM_FREE (1<<6)
#define MPUTIM_CLOCK_ENABLE (1<<5)
-#define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
#define MPUTIM_PTV_BIT 2
#define MPUTIM_AR (1<<1)
#define MPUTIM_ST (1<<0)
diff --git a/include/configs/omap730.h b/include/configs/omap730.h
index 03abcb3..04d5144 100755
--- a/include/configs/omap730.h
+++ b/include/configs/omap730.h
@@ -150,7 +150,7 @@
/* MPU_CNTL_TIMER register bits */
#define MPUTIM_FREE (1<<6)
#define MPUTIM_CLOCK_ENABLE (1<<5)
-#define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+#define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
#define MPUTIM_PTV_BIT 2
#define MPUTIM_AR (1<<1)
#define MPUTIM_ST (1<<0)
--
1.5.6.4
More information about the U-Boot
mailing list