[U-Boot] [PATCH] ARM DaVinci: Changing function names for EMAC driver
s-paulraj at ti.com
s-paulraj at ti.com
Fri Aug 22 21:09:01 CEST 2008
DM644x is just one of a series of DaVinci chips that use the EMAC driver.
By replacing all the function names that start with dm644x_* to davinci_*
we make these function more portable. I have tested this change on my EVM.
DM6467 is another DaVinci SOC which uses the EMAC driver and i will
be sending patches that add DaVinci DM6467 support to the list soon.
Signed-off-by: Sandeep Paulraj <s-paulraj at ti.com>
---
cpu/arm926ejs/davinci/dp83848.c | 24 ++++----
cpu/arm926ejs/davinci/ether.c | 114 +++++++++++++++++++-------------------
cpu/arm926ejs/davinci/lxt972.c | 20 ++++----
lib_arm/board.c | 4 +-
net/eth.c | 2 +-
5 files changed, 82 insertions(+), 82 deletions(-)
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 2aa9ef1..59f039b 100644
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -38,9 +38,9 @@ int dp83848_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
return(0);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
return(0);
if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
@@ -54,13 +54,13 @@ int dp83848_get_link_speed(int phy_addr)
u_int16_t tmp;
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
return(0);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -101,7 +101,7 @@ int dp83848_init_phy(int phy_addr)
}
/* Disable PHY Interrupts */
- dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+ davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
return(ret);
}
@@ -112,13 +112,13 @@ int dp83848_auto_negotiate(int phy_addr)
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Set the Auto_negotiation Advertisement Register
* MII advertising for Next page, 100BaseTxFD and HD,
@@ -126,23 +126,23 @@ int dp83848_auto_negotiate(int phy_addr)
*/
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
- dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
/* Read Control Register */
- if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Restart Auto_negotiation */
tmp |= DP83848_RESTART_AUTONEG;
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/*check AutoNegotiate complete */
udelay(10000);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_AUTONEG_COMP))
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 5ae035b..f6f81df 100644
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -50,12 +50,12 @@ unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
/* Internal static functions */
-static int dm644x_eth_hw_init (void);
-static int dm644x_eth_open (void);
-static int dm644x_eth_close (void);
-static int dm644x_eth_send_packet (volatile void *packet, int length);
-static int dm644x_eth_rcv_packet (void);
-static void dm644x_eth_mdio_enable(void);
+static int davinci_eth_hw_init (void);
+static int davinci_eth_open (void);
+static int davinci_eth_close (void);
+static int davinci_eth_send_packet (volatile void *packet, int length);
+static int davinci_eth_rcv_packet (void);
+static void davinci_eth_mdio_enable(void);
static int gen_init_phy(int phy_addr);
static int gen_is_phy_connected(int phy_addr);
@@ -65,48 +65,48 @@ static int gen_auto_negotiate(int phy_addr);
/* Wrappers exported to the U-Boot proper */
int eth_hw_init(void)
{
- return(dm644x_eth_hw_init());
+ return(davinci_eth_hw_init());
}
int eth_init(bd_t * bd)
{
- return(dm644x_eth_open());
+ return(davinci_eth_open());
}
void eth_halt(void)
{
- dm644x_eth_close();
+ davinci_eth_close();
}
int eth_send(volatile void *packet, int length)
{
- return(dm644x_eth_send_packet(packet, length));
+ return(davinci_eth_send_packet(packet, length));
}
int eth_rx(void)
{
- return(dm644x_eth_rcv_packet());
+ return(davinci_eth_rcv_packet());
}
void eth_mdio_enable(void)
{
- dm644x_eth_mdio_enable();
+ davinci_eth_mdio_enable();
}
/* End of wrappers */
-static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
/*
* This function must be called before emac_open() if you want to override
* the default mac address.
*/
-void dm644x_eth_set_mac_addr(const u_int8_t *addr)
+void davinci_eth_set_mac_addr(const u_int8_t *addr)
{
int i;
- for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
- dm644x_eth_mac_addr[i] = addr[i];
+ for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
+ davinci_eth_mac_addr[i] = addr[i];
}
}
@@ -130,7 +130,7 @@ static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
-static void dm644x_eth_mdio_enable(void)
+static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
@@ -149,7 +149,7 @@ static void dm644x_eth_mdio_enable(void)
* If no active PHY (or more than one PHY) found returns 0.
* Sets active_phy_addr variable.
*/
-static int dm644x_eth_phy_detect(void)
+static int davinci_eth_phy_detect(void)
{
u_int32_t phy_act_state;
int i;
@@ -159,7 +159,7 @@ static int dm644x_eth_phy_detect(void)
if ((phy_act_state = adap_mdio->ALIVE) == 0)
return(0); /* No active PHYs */
- debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
+ debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
for (i = 0; i < 32; i++) {
if (phy_act_state & (1 << i)) {
@@ -177,7 +177,7 @@ static int dm644x_eth_phy_detect(void)
/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
-int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
{
int tmp;
@@ -201,7 +201,7 @@ int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
}
/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
-int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
{
while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
@@ -235,14 +235,14 @@ static int gen_is_phy_connected(int phy_addr)
{
u_int16_t dummy;
- return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+ return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
}
static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
- if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+ if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
return(1);
return(0);
@@ -252,16 +252,16 @@ static int gen_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_BMCR_AUTON;
- dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
if (!(tmp & PHY_BMSR_AUTN_COMP))
@@ -273,19 +273,19 @@ static int gen_auto_negotiate(int phy_addr)
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
+static int davinci_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
{
- return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
+ return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1);
}
-static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
+static int davinci_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
{
- return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
+ return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1);
}
-int dm644x_eth_miiphy_initialize(bd_t *bis)
+int davinci_eth_miiphy_initialize(bd_t *bis)
{
- miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
+ miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
return(1);
}
@@ -296,13 +296,13 @@ int dm644x_eth_miiphy_initialize(bd_t *bis)
* EMAC modules power or pin multiplexors, that is done by board_init()
* much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/
-static int dm644x_eth_hw_init(void)
+static int davinci_eth_hw_init(void)
{
u_int32_t phy_id;
u_int16_t tmp;
int i;
- dm644x_eth_mdio_enable();
+ davinci_eth_mdio_enable();
for (i = 0; i < 256; i++) {
if (adap_mdio->ALIVE)
@@ -316,18 +316,18 @@ static int dm644x_eth_hw_init(void)
}
/* Find if a PHY is connected and get it's address */
- if (!dm644x_eth_phy_detect())
+ if (!davinci_eth_phy_detect())
return(0);
/* Get PHY ID and initialize phy_ops for a detected PHY */
- if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
phy_id = (tmp << 16) & 0xffff0000;
- if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
@@ -364,7 +364,7 @@ static int dm644x_eth_hw_init(void)
/* Eth device open */
-static int dm644x_eth_open(void)
+static int davinci_eth_open(void)
{
dv_reg_p addr;
u_int32_t clkdiv, cnt;
@@ -389,26 +389,26 @@ static int dm644x_eth_open(void)
/* Using channel 0 only - other channels are disabled */
adap_emac->MACINDEX = 0;
adap_emac->MACADDRHI =
- (dm644x_eth_mac_addr[3] << 24) |
- (dm644x_eth_mac_addr[2] << 16) |
- (dm644x_eth_mac_addr[1] << 8) |
- (dm644x_eth_mac_addr[0]);
+ (davinci_eth_mac_addr[3] << 24) |
+ (davinci_eth_mac_addr[2] << 16) |
+ (davinci_eth_mac_addr[1] << 8) |
+ (davinci_eth_mac_addr[0]);
adap_emac->MACADDRLO =
- (dm644x_eth_mac_addr[5] << 8) |
- (dm644x_eth_mac_addr[4]);
+ (davinci_eth_mac_addr[5] << 8) |
+ (davinci_eth_mac_addr[4]);
adap_emac->MACHASH1 = 0;
adap_emac->MACHASH2 = 0;
/* Set source MAC address - REQUIRED */
adap_emac->MACSRCADDRHI =
- (dm644x_eth_mac_addr[3] << 24) |
- (dm644x_eth_mac_addr[2] << 16) |
- (dm644x_eth_mac_addr[1] << 8) |
- (dm644x_eth_mac_addr[0]);
+ (davinci_eth_mac_addr[3] << 24) |
+ (davinci_eth_mac_addr[2] << 16) |
+ (davinci_eth_mac_addr[1] << 8) |
+ (davinci_eth_mac_addr[0]);
adap_emac->MACSRCADDRLO =
- (dm644x_eth_mac_addr[4] << 8) |
- (dm644x_eth_mac_addr[5]);
+ (davinci_eth_mac_addr[4] << 8) |
+ (davinci_eth_mac_addr[5]);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -473,7 +473,7 @@ static int dm644x_eth_open(void)
}
/* EMAC Channel Teardown */
-static void dm644x_eth_ch_teardown(int ch)
+static void davinci_eth_ch_teardown(int ch)
{
dv_reg dly = 0xff;
dv_reg cnt;
@@ -516,12 +516,12 @@ static void dm644x_eth_ch_teardown(int ch)
}
/* Eth device close */
-static int dm644x_eth_close(void)
+static int davinci_eth_close(void)
{
debug_emac("+ emac_close\n");
- dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
- dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
+ davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
+ davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
/* Reset EMAC module and disable interrupts in wrapper */
adap_emac->SOFTRESET = 1;
@@ -537,7 +537,7 @@ static int tx_send_loop = 0;
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
-static int dm644x_eth_send_packet (volatile void *packet, int length)
+static int davinci_eth_send_packet (volatile void *packet, int length)
{
int ret_status = -1;
@@ -568,7 +568,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
/* Wait for packet to complete or link down */
while (1) {
if (!phy.get_link_speed (active_phy_addr)) {
- dm644x_eth_ch_teardown (EMAC_CH_TX);
+ davinci_eth_ch_teardown (EMAC_CH_TX);
return (ret_status);
}
if (adap_emac->TXINTSTATRAW & 0x01) {
@@ -584,7 +584,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
/*
* This function handles receipt of a packet from the network
*/
-static int dm644x_eth_rcv_packet (void)
+static int davinci_eth_rcv_packet (void)
{
volatile emac_desc *rx_curr_desc;
volatile emac_desc *curr_desc;
diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
index 8130b48..ce3e41c 100644
--- a/cpu/arm926ejs/davinci/lxt972.c
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -39,9 +39,9 @@ int lxt972_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
- if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
+ if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
return(0);
- if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
+ if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
return(0);
if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
@@ -55,20 +55,20 @@ int lxt972_get_link_speed(int phy_addr)
u_int16_t stat1, tmp;
volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
return(0);
if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
return(0);
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
- dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
/* Read back */
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -95,7 +95,7 @@ int lxt972_init_phy(int phy_addr)
}
/* Disable PHY Interrupts */
- dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+ davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
return(ret);
}
@@ -105,16 +105,16 @@ int lxt972_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_BMCR_RST_NEG;
- dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
if (!(tmp & PHY_BMSR_AUTN_COMP))
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 6e3ef08..5ade882 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -430,9 +430,9 @@ void start_armboot (void)
/* Perform network card initialisation if necessary */
#ifdef CONFIG_DRIVER_TI_EMAC
-extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
if (getenv ("ethaddr")) {
- dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+ davinci_eth_set_mac_addr(gd->bd->bi_enetaddr);
}
#endif
diff --git a/net/eth.c b/net/eth.c
index 8e83b66..76992ec 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -623,7 +623,7 @@ int eth_initialize(bd_t *bis)
ns7520_miiphy_initialize(bis);
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
- dm644x_eth_miiphy_initialize(bis);
+ davinci_eth_miiphy_initialize(bis);
#endif
return 0;
}
--
1.5.6.4
More information about the U-Boot
mailing list