[U-Boot] [PATCH] ppc44x: RFC: Unification of virtex5 pp440 boards

Ricardo Ribalda Delgado ricardo.ribalda at uam.es
Mon Aug 25 20:42:11 CEST 2008


This patch provides an unificated way of handling ppc440 boards.

It unificates 3 different things:

1) Source code
A new board called ppc440-generic has been created. This board includes
a generic tlb initialization (Maps the whole memory into virtual) and
defines board_pre_init, checkboard, initdram and get_sys_info weakly,
so, they can be replaced by specific functions.

If a new board needs to redefine any of the previous functions
(specific initialization) it can create a new directory with the
specific initializations needed. (see the example ml507 board).

2) Configuration file
Common configurations are located under configs/xilinx-ppc440.h, this
header file interpretes the xparameters file generated by EDK and
configurates u-boot in correspondence. Example: if there is a Temac,
allows CMD_CONFIG_NET
Specific configuration are located under specific configuration file.
(see the example ml507 board)

3) Makefile
Some work has been done in order to not duplicate work in the Main
Makefile. Please see the attached code.

In order to support new boards they can be implemented in the next way:

a) Simple Generic Board  (90% of the time)
Using EDK generates a new xparameters.h file, replace
ppc440-generic/xparameters.h  and run make xilinx-ppc440-generic_config
&& make

b) Simple Boards with special u-boot parameters (9 % of the time)
Create a new file under configs for it (use ml507.h as example) and
change your paramaters. Create a new Makefile paragraph and compile

c) Complex boards (1% of the time)
Create a new folder for the board, like the ml507

Waiting for your comments

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at uam.es>
---
 CREDITS                                            |    3 +-
 MAINTAINERS                                        |    2 +
 MAKEALL                                            |    4 +
 Makefile                                           |   58 +++++++--
 board/avnet/v5fx30teval/.gitignore                 |    3 +
 board/avnet/v5fx30teval/Makefile                   |   27 ++++
 board/avnet/v5fx30teval/v5fx30teval.c              |   28 ++++
 board/avnet/v5fx30teval/xparameters.h              |   36 +++++
 board/xilinx/ml507/.gitignore                      |    3 +
 board/xilinx/ml507/Makefile                        |   41 +-----
 board/xilinx/ml507/config.mk                       |   27 ----
 board/xilinx/ml507/init.S                          |   53 -------
 board/xilinx/ml507/ml507.c                         |   21 +---
 board/xilinx/ml507/u-boot-ram.lds                  |  134 ------------------
 board/xilinx/ml507/u-boot-rom.lds                  |  144 --------------------
 board/xilinx/ppc440-generic/.gitignore             |    3 +
 board/xilinx/ppc440-generic/Makefile               |   58 ++++++++
 board/xilinx/ppc440-generic/init.S                 |   45 ++++++
 board/xilinx/ppc440-generic/u-boot-ram.lds         |  134 ++++++++++++++++++
 board/xilinx/ppc440-generic/u-boot-rom.lds         |  144 ++++++++++++++++++++
 .../xilinx/ppc440-generic/xilinx_ppc440_generic.c  |   51 +++++++
 board/xilinx/ppc440-generic/xparameters.h          |   37 +++++
 include/configs/ml507.h                            |   87 +-----------
 include/configs/v5fx30teval.h                      |   49 +++++++
 include/configs/xilinx-ppc440-generic.h            |   49 +++++++
 include/configs/xilinx-ppc440.h                    |  106 ++++++++++++++
 26 files changed, 842 insertions(+), 505 deletions(-)
 create mode 100644 board/avnet/v5fx30teval/.gitignore
 create mode 100644 board/avnet/v5fx30teval/Makefile
 create mode 100644 board/avnet/v5fx30teval/v5fx30teval.c
 create mode 100644 board/avnet/v5fx30teval/xparameters.h
 create mode 100644 board/xilinx/ml507/.gitignore
 delete mode 100644 board/xilinx/ml507/config.mk
 delete mode 100644 board/xilinx/ml507/init.S
 delete mode 100644 board/xilinx/ml507/u-boot-ram.lds
 delete mode 100644 board/xilinx/ml507/u-boot-rom.lds
 create mode 100644 board/xilinx/ppc440-generic/.gitignore
 create mode 100644 board/xilinx/ppc440-generic/Makefile
 create mode 100644 board/xilinx/ppc440-generic/init.S
 create mode 100644 board/xilinx/ppc440-generic/u-boot-ram.lds
 create mode 100644 board/xilinx/ppc440-generic/u-boot-rom.lds
 create mode 100644 board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
 create mode 100644 board/xilinx/ppc440-generic/xparameters.h
 create mode 100644 include/configs/v5fx30teval.h
 create mode 100644 include/configs/xilinx-ppc440-generic.h
 create mode 100644 include/configs/xilinx-ppc440.h

diff --git a/CREDITS b/CREDITS
index 4fe4e63..3767322 100644
--- a/CREDITS
+++ b/CREDITS
@@ -405,7 +405,8 @@ D: Atmel AT91CAP9ADK support
 
 N: Ricardo Ribalda Delgado
 E: ricardo.ribalda at uam.es
-D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460
+D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
+D: Virtex ppc440 generic architecture
 W: http://www.ii.uam.es/~rribalda
 
 N: Stefan Roese
diff --git a/MAINTAINERS b/MAINTAINERS
index 31493c2..47220e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -318,6 +318,8 @@ Daniel Poirot <dan.poirot at windriver.com>
 Ricardo Ribalda <ricardo.ribalda at uam.es>
 
 	ml507 		PPC440x5
+	v5fx30teval	PPC440x5
+	xilinx-pp440-generic	PPC440x5
 
 Stefan Roese <sr at denx.de>
 
diff --git a/MAKEALL b/MAKEALL
index edfee90..6aa1723 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -231,12 +231,16 @@ LIST_4xx="		\
 	sequoia_nand	\
 	taihu		\
 	taishan		\
+	v5fx30teval	\
+	v5fx30teval_flash \
 	VOH405		\
 	VOM405		\
 	W7OLMC		\
 	W7OLMG		\
 	walnut		\
 	WUH405		\
+	xilinx-ppc440-generic \
+	xilinx-ppc440-generic_flash \
 	XPEDITE1K	\
 	yellowstone	\
 	yosemite	\
diff --git a/Makefile b/Makefile
index 8c90dab..74c9560 100644
--- a/Makefile
+++ b/Makefile
@@ -1351,16 +1351,19 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
 
-ml507_flash_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-rom.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
-
-ml507_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp $(obj)board/xilinx/ml507/u-boot-ram.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
+ml507_flash_config:
+	BOARD_DIR=$(obj)board/xilinx/ml507 \
+	TEXT_BASE=0xFE360000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-rom.lds \
+	CONFIG_SCRIPT="ml507 ppc ppc4xx ml507 xilinx" \
+	$(MAKE) xilinx_ppc440
+
+ml507_config:
+	BOARD_DIR=$(obj)board/xilinx/ml507 \
+	TEXT_BASE=0x04000000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-ram.lds \
+	CONFIG_SCRIPT="ml507 ppc ppc4xx ml507 xilinx" \
+	$(MAKE) xilinx_ppc440
 
 ocotea_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
@@ -1456,6 +1459,20 @@ taihu_config:	unconfig
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
 
+v5fx30teval_config:
+	BOARD_DIR=$(obj)board/avnet/v5fx30teval \
+	TEXT_BASE=0xFF1C0000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-rom.lds \
+	CONFIG_SCRIPT="v5fx30teval ppc ppc4xx v5fx30teval avnet" \
+	$(MAKE) xilinx_ppc440
+
+v5fx30teval_flash_config:
+	BOARD_DIR=$(obj)board/avnet/v5fx30teval \
+	TEXT_BASE=0x03000000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-ram.lds \
+	CONFIG_SCRIPT="v5fx30teval ppc ppc4xx v5fx30teval avnet" \
+	$(MAKE) xilinx_ppc440
+
 VOH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -1474,6 +1491,27 @@ sycamore_config: unconfig
 WUH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
 
+xilinx-ppc440-generic_flash_config:
+	BOARD_DIR=$(obj)board/xilinx/ppc440-generic \
+	TEXT_BASE=0xFE360000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-ram.lds \
+	CONFIG_SCRIPT="xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx" \
+	$(MAKE) xilinx_ppc440
+
+xilinx-ppc440-generic_config:
+	BOARD_DIR=$(obj)board/xilinx/ppc440-generic \
+	TEXT_BASE=0x04000000 \
+	LINK_SCRIPT=$(obj)board/xilinx/ppc440-generic/u-boot-ram.lds \
+	CONFIG_SCRIPT="xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx" \
+	$(MAKE) xilinx_ppc440
+
+xilinx_ppc440: unconfig
+	@mkdir -p $(obj)include $(BOARD_DIR)
+	@cp $(LINK_SCRIPT) $(BOARD_DIR)/u-boot.lds
+	@echo "TEXT_BASE = 0xFE360000" > $(BOARD_DIR)/config.mk
+	@$(MKCONFIG) $(CONFIG_SCRIPT)
+
+
 XPEDITE1K_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
 
diff --git a/board/avnet/v5fx30teval/.gitignore b/board/avnet/v5fx30teval/.gitignore
new file mode 100644
index 0000000..06ac9c1
--- /dev/null
+++ b/board/avnet/v5fx30teval/.gitignore
@@ -0,0 +1,3 @@
+/u-boot.lds
+/config.tmp
+/config.mk
diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile
new file mode 100644
index 0000000..de23f29
--- /dev/null
+++ b/board/avnet/v5fx30teval/Makefile
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda at uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+COBJS	+= $(BOARD).o
+
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c
new file mode 100644
index 0000000..14a1d5d
--- /dev/null
+++ b/board/avnet/v5fx30teval/v5fx30teval.c
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+
+int checkboard(void)
+{
+	puts("Avnet Virtex 5 FX30 Evaluation Board\n");
+	return 0;
+}
diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h
new file mode 100644
index 0000000..4d60a25
--- /dev/null
+++ b/board/avnet/v5fx30teval/xparameters.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR 	0x00000000
+#define XPAR_INTC_0_BASEADDR 		0x81800000
+#define XPAR_LLTEMAC_0_BASEADDR 	0x81C00000
+#define XPAR_UARTLITE_0_BASEADDR 	0x84000000
+#define XPAR_SPI_0_BASEADDR		0x83400000
+#define XPAR_FLASH_MEM0_BASEADDR 	0xFF000000
+#define XPAR_PLB_CLOCK_FREQ_HZ 		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ 	400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_SPI_0_NUM_TRANSFER_BITS	8
+
+#endif
diff --git a/board/xilinx/ml507/.gitignore b/board/xilinx/ml507/.gitignore
new file mode 100644
index 0000000..06ac9c1
--- /dev/null
+++ b/board/xilinx/ml507/.gitignore
@@ -0,0 +1,3 @@
+/u-boot.lds
+/config.tmp
+/config.mk
diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile
index 7283704..de23f29 100644
--- a/board/xilinx/ml507/Makefile
+++ b/board/xilinx/ml507/Makefile
@@ -1,6 +1,7 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda at uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -21,38 +22,6 @@
 # MA 02111-1307 USA
 #
 
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-endif
+COBJS	+= $(BOARD).o
 
-INCS		:=
-CFLAGS		+= $(INCS)
-HOST_CFLAGS	+= $(INCS)
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/xilinx/ml507/config.mk b/board/xilinx/ml507/config.mk
deleted file mode 100644
index e827e8a..0000000
--- a/board/xilinx/ml507/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef TEXT_BASE
-TEXT_BASE = 0x04000000
-endif
diff --git a/board/xilinx/ml507/init.S b/board/xilinx/ml507/init.S
deleted file mode 100644
index 3228a65..0000000
--- a/board/xilinx/ml507/init.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
- *  This work has been supported by: QTechnology  http://qtec.com/
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm-ppc/mmu.h>
-
-.section .bootpg,"ax"
-.globl tlbtab
-
-tlbtab:
-tlbtab_start
-	/* SDRAM */
-tlbentry(XPAR_DDR2_SDRAM_MEM_BASEADDR, SZ_256M, CFG_SDRAM_BASE, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-	/* UART */
-tlbentry(XPAR_UARTLITE_0_BASEADDR, SZ_64K, XPAR_UARTLITE_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-	/* PIC */
-tlbentry(XPAR_INTC_0_BASEADDR, SZ_64K, XPAR_INTC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#ifdef XPAR_IIC_EEPROM_BASEADDR
-	/* I2C */
-tlbentry(XPAR_IIC_EEPROM_BASEADDR, SZ_64K, XPAR_IIC_EEPROM_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_LLTEMAC_0_BASEADDR
-	/* Net */
-tlbentry(XPAR_LLTEMAC_0_BASEADDR, SZ_64K, XPAR_LLTEMAC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_FLASH_MEM0_BASEADDR
-	/*Flash*/
-tlbentry(XPAR_FLASH_MEM0_BASEADDR, SZ_256M, XPAR_FLASH_MEM0_BASEADDR, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-#endif
-tlbtab_end
diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c
index d499303..f9789cf 100644
--- a/board/xilinx/ml507/ml507.c
+++ b/board/xilinx/ml507/ml507.c
@@ -20,28 +20,9 @@
 #include <common.h>
 #include <asm/processor.h>
 
-int board_pre_init(void)
-{
-	return 0;
-}
 
 int checkboard(void)
 {
-	puts("ML507 Board\n");
+	puts("Xilinx ML507 Board\n");
 	return 0;
 }
-
-phys_size_t initdram(int board_type)
-{
-	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
-			    CFG_SDRAM_SIZE_MB * 1024 * 1024);
-}
-
-void get_sys_info(sys_info_t * sysInfo)
-{
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = 0;
-
-	return;
-}
diff --git a/board/xilinx/ml507/u-boot-ram.lds b/board/xilinx/ml507/u-boot-ram.lds
deleted file mode 100644
index 2c98d27..0000000
--- a/board/xilinx/ml507/u-boot-ram.lds
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start_440)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xilinx/ml507/u-boot-rom.lds b/board/xilinx/ml507/u-boot-rom.lds
deleted file mode 100644
index d5da018..0000000
--- a/board/xilinx/ml507/u-boot-rom.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-ENTRY(_start_440)
-
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-
-  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
-
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xilinx/ppc440-generic/.gitignore b/board/xilinx/ppc440-generic/.gitignore
new file mode 100644
index 0000000..06ac9c1
--- /dev/null
+++ b/board/xilinx/ppc440-generic/.gitignore
@@ -0,0 +1,3 @@
+/u-boot.lds
+/config.tmp
+/config.mk
diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile
new file mode 100644
index 0000000..887ce87
--- /dev/null
+++ b/board/xilinx/ppc440-generic/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+endif
+
+INCS		:=
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	+= $(SRCTREE)/board/xilinx/ppc440-generic/xilinx_ppc440_generic.o
+
+SOBJS	+= $(SRCTREE)/board/xilinx/ppc440-generic/init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S
new file mode 100644
index 0000000..1409467
--- /dev/null
+++ b/board/xilinx/ppc440-generic/init.S
@@ -0,0 +1,45 @@
+/*
+ *  (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+.section .bootpg,"ax"
+.globl tlbtab
+
+tlbtab:
+tlbtab_start
+tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbtab_end
diff --git a/board/xilinx/ppc440-generic/u-boot-ram.lds b/board/xilinx/ppc440-generic/u-boot-ram.lds
new file mode 100644
index 0000000..2c98d27
--- /dev/null
+++ b/board/xilinx/ppc440-generic/u-boot-ram.lds
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start_440)
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/xilinx/ppc440-generic/u-boot-rom.lds b/board/xilinx/ppc440-generic/u-boot-rom.lds
new file mode 100644
index 0000000..d5da018
--- /dev/null
+++ b/board/xilinx/ppc440-generic/u-boot-rom.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start_440)
+
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
new file mode 100644
index 0000000..db683d4
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+int __board_pre_init(void)
+{
+	return 0;
+}
+int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
+
+int __checkboard(void)
+{
+	puts("Xilinx PPC440 Generic Board\n");
+	return 0;
+}
+int checkboard(void) __attribute__((weak, alias("__checkboard")));
+
+phys_size_t __initdram(int board_type)
+{
+	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
+			    CFG_SDRAM_SIZE_MB * 1024 * 1024);
+}
+phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
+
+void __get_sys_info(sys_info_t * sysInfo)
+{
+	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sysInfo->freqPCI = 0;
+
+	return;
+}
+void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h
new file mode 100644
index 0000000..bda5826
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xparameters.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR 	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR 	0x81600000
+#define XPAR_INTC_0_BASEADDR 		0x81800000
+#define XPAR_LLTEMAC_0_BASEADDR 	0x81C00000
+#define XPAR_UARTLITE_0_BASEADDR 	0x84000000
+#define XPAR_SPI_0_BASEADDR		0x83400000
+#define XPAR_FLASH_MEM0_BASEADDR 	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ 		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ 	400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+#define XPAR_SPI_0_NUM_TRANSFER_BITS	8
+
+#endif
diff --git a/include/configs/ml507.h b/include/configs/ml507.h
index f8cd499..0d528ab 100644
--- a/include/configs/ml507.h
+++ b/include/configs/ml507.h
@@ -17,106 +17,33 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_ML507	1
-#define CONFIG_XILINX_440	1
+
+/*CPU*/
 #define CONFIG_440		1
-#define CONFIG_4xx		1
+#define CONFIG_XILINX_ML507	1
 #include "../board/xilinx/ml507/xparameters.h"
 
 /*Mem Map*/
-#define CFG_SDRAM_BASE		0x0
 #define CFG_SDRAM_SIZE_MB	256
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		( 192 * 1024 )
-#define CFG_MALLOC_LEN		( CFG_ENV_SIZE + 128 * 1024 )
-
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
 
 /*Env*/
-#define	CFG_ENV_IS_IN_FLASH
+#define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_SIZE		0x20000
 #define	CFG_ENV_SECT_SIZE	0x20000
 #define CFG_ENV_OFFSET 		0x340000
 #define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
 
 /*Misc*/
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds     */
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt       */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
-#define CFG_EXTBDINFO		1		/* Extended board_into (bd_t) */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING			/* add command line history     */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support   */
-#define CONFIG_LOOPW				/* enable loopw command         */
-#define CONFIG_MX_CYCLIC			/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE			/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET			/* don't print console @ startup */
-#define CFG_HUSH_PARSER				/* Use the HUSH parser          */
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_LOADS_ECHO			/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE			/* allow baudrate change        */
-#define CFG_BOOTMAPSZ		( 8 << 20 )	/* Initial Memory map for Linux */
+#define CFG_PROMPT		"ml507:/# "	/* Monitor Command Prompt       */
 #define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
 
-/*Stack*/
-#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
-
 /*Flash*/
-#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
 #define	CFG_FLASH_SIZE		(32*1024*1024)
-#define	CFG_FLASH_CFI		1
-#define	CONFIG_FLASH_CFI_DRIVER	1
-#define	CFG_FLASH_EMPTY_INFO	1
-#define	CFG_MAX_FLASH_BANKS	1
 #define	CFG_MAX_FLASH_SECT	259
-#define	CFG_FLASH_PROTECTION
 #define MTDIDS_DEFAULT		"nor0=ml507-flash"
 #define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
 
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
 
 #endif						/* __CONFIG_H */
diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h
new file mode 100644
index 0000000..314841a
--- /dev/null
+++ b/include/configs/v5fx30teval.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440		1
+#define CONFIG_XILINX_ML507	1
+#include "../board/avnet/v5fx30teval/xparameters.h"
+
+/*Mem Map*/
+#define CFG_SDRAM_SIZE_MB	64
+
+/*Env*/
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_SIZE		0x20000
+#define	CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_OFFSET 		0x1A0000
+#define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+
+/*Misc*/
+#define CFG_PROMPT		"v5fx30t:/# "	/* Monitor Command Prompt       */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CFG_FLASH_SIZE		(16*1024*1024)
+#define	CFG_MAX_FLASH_SECT	131
+#define MTDIDS_DEFAULT		"nor0=v5fx30t-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=v5fx30t-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h
new file mode 100644
index 0000000..f08f322
--- /dev/null
+++ b/include/configs/xilinx-ppc440-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440			1
+#define CONFIG_XILINX_PPC440_GENERIC	1
+#include "../board/xilinx/ppc440-generic/xparameters.h"
+
+/*Mem Map*/
+#define CFG_SDRAM_SIZE_MB	256
+
+/*Env*/
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_SIZE		0x20000
+#define	CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_OFFSET 		0x340000
+#define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+
+/*Misc*/
+#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt       */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CFG_FLASH_SIZE		(32*1024*1024)
+#define	CFG_MAX_FLASH_SECT	259
+#define MTDIDS_DEFAULT		"nor0=ml507-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
new file mode 100644
index 0000000..89f70b1
--- /dev/null
+++ b/include/configs/xilinx-ppc440.h
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda at uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+/*
+#define DEBUG
+#define ET_DEBUG
+*/
+ /*CPU*/
+#define CONFIG_XILINX_440	1
+#define CONFIG_440		1
+#define CONFIG_4xx		1
+
+/*Mem Map*/
+#define CFG_SDRAM_BASE		0x0
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		( 192 * 1024 )
+#define CFG_MALLOC_LEN		( CFG_ENV_SIZE + 128 * 1024 )
+
+/*Uart*/
+#define CONFIG_XILINX_UARTLITE
+#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
+#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
+#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
+
+/*Cmd*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+
+/*Misc*/
+#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds     */
+#define CFG_LONGHELP				/* undef to save memory         */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
+#define CFG_MAXARGS		16		/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
+#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
+#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
+#define CFG_EXTBDINFO		1		/* Extended board_into (bd_t) */
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING			/* add command line history     */
+#define CONFIG_AUTO_COMPLETE			/* add autocompletion support   */
+#define CONFIG_LOOPW				/* enable loopw command         */
+#define CONFIG_MX_CYCLIC			/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE			/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET			/* don't print console @ startup */
+#define CFG_HUSH_PARSER				/* Use the HUSH parser          */
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_LOADS_ECHO			/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE			/* allow baudrate change        */
+#define CFG_BOOTMAPSZ		( 8 << 20 )	/* Initial Memory map for Linux */
+
+/*Stack*/
+#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
+#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
+#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+/*Speed*/
+#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
+
+/*Flash*/
+#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
+#define	CFG_FLASH_CFI		1
+#define	CONFIG_FLASH_CFI_DRIVER	1
+#define	CFG_FLASH_EMPTY_INFO	1
+#define	CFG_MAX_FLASH_BANKS	1
+#define	CFG_FLASH_PROTECTION
+
+#endif						/* __CONFIG_H */
-- 
1.5.6.3



More information about the U-Boot mailing list