[U-Boot] [PATCH] cmd_mem.c: Fix help message alignment

[Wolfgang Denk]

Bug was introced by "Big white-space cleanup" (53677ef1)

Signed-off-by: Wolfgang Denk <wd at denx.de>
---
 common/cmd_mem.c |   30 +++++++++++++++---------------
 1 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index a78355c..4766c24 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1230,39 +1230,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #if defined(CONFIG_CMD_MEMORY)
 U_BOOT_CMD(
 	md,	3,	1,	do_mem_md,
-	"md	 - memory display\n",
+	"md	- memory display\n",
 	"[.b, .w, .l] address [# of objects]\n	  - memory display\n"
 );
 
 
 U_BOOT_CMD(
 	mm,	2,	1,	do_mem_mm,
-	"mm	 - memory modify (auto-incrementing)\n",
+	"mm	- memory modify (auto-incrementing)\n",
 	"[.b, .w, .l] address\n" "    - memory modify, auto increment address\n"
 );
 
 
 U_BOOT_CMD(
 	nm,	2,	1,	do_mem_nm,
-	"nm	 - memory modify (constant address)\n",
+	"nm	- memory modify (constant address)\n",
 	"[.b, .w, .l] address\n    - memory modify, read and keep address\n"
 );
 
 U_BOOT_CMD(
 	mw,	4,	1,	do_mem_mw,
-	"mw	 - memory write (fill)\n",
-	"[.b, .w, .l] address value [count]\n	 - write memory\n"
+	"mw	- memory write (fill)\n",
+	"[.b, .w, .l] address value [count]\n	- write memory\n"
 );
 
 U_BOOT_CMD(
 	cp,	4,	1,	do_mem_cp,
-	"cp	 - memory copy\n",
+	"cp	- memory copy\n",
 	"[.b, .w, .l] source target count\n    - copy memory\n"
 );
 
 U_BOOT_CMD(
 	cmp,	4,	1,	do_mem_cmp,
-	"cmp	 - memory compare\n",
+	"cmp	- memory compare\n",
 	"[.b, .w, .l] addr1 addr2 count\n    - compare memory\n"
 );
 
@@ -1270,7 +1270,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	crc32,	4,	1,	do_mem_crc,
-	"crc32	 - checksum calculation\n",
+	"crc32	- checksum calculation\n",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 );
 
@@ -1278,7 +1278,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	crc32,	5,	1,	do_mem_crc,
-	"crc32	 - checksum calculation\n",
+	"crc32	- checksum calculation\n",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 	"-v address count crc\n    - verify crc of memory area\n"
 );
@@ -1287,14 +1287,14 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	base,	2,	1,	do_mem_base,
-	"base	 - print or set address offset\n",
+	"base	- print or set address offset\n",
 	"\n    - print address offset for memory commands\n"
 	"base off\n    - set address offset for memory commands to 'off'\n"
 );
 
 U_BOOT_CMD(
 	loop,	3,	1,	do_mem_loop,
-	"loop	 - infinite loop on address range\n",
+	"loop	- infinite loop on address range\n",
 	"[.b, .w, .l] address number_of_objects\n"
 	"    - loop on a set of addresses\n"
 );
@@ -1302,7 +1302,7 @@ U_BOOT_CMD(
 #ifdef CONFIG_LOOPW
 U_BOOT_CMD(
 	loopw,	4,	1,	do_mem_loopw,
-	"loopw	 - infinite write loop on address range\n",
+	"loopw	- infinite write loop on address range\n",
 	"[.b, .w, .l] address number_of_objects data_to_write\n"
 	"    - loop on a set of addresses\n"
 );
@@ -1310,7 +1310,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
 	mtest,	4,	1,	do_mem_mtest,
-	"mtest	 - simple RAM test\n",
+	"mtest	- simple RAM test\n",
 	"[start [end [pattern]]]\n"
 	"    - simple RAM read/write test\n"
 );
@@ -1318,13 +1318,13 @@ U_BOOT_CMD(
 #ifdef CONFIG_MX_CYCLIC
 U_BOOT_CMD(
 	mdc,	4,	1,	do_mem_mdc,
-	"mdc	 - memory display cyclic\n",
+	"mdc	- memory display cyclic\n",
 	"[.b, .w, .l] address count delay(ms)\n    - memory display cyclic\n"
 );
 
 U_BOOT_CMD(
 	mwc,	4,	1,	do_mem_mwc,
-	"mwc	 - memory write cyclic\n",
+	"mwc	- memory write cyclic\n",
 	"[.b, .w, .l] address value delay(ms)\n    - memory write cyclic\n"
 );
 #endif /* CONFIG_MX_CYCLIC */
-- 
1.5.3.3