[U-Boot] [PATCH] [ARM] Change the UDP Checksum code to work with ARM data alignment.

[Stefan Roese]

On Wednesday 27 August 2008, Wolfgang Denk wrote:
> > The only 100%* way to send patches is using git-send-email, but it's a
> > small pain to set up especially if you're not going to be using it much.
>
> oops? What do you mean by "pain to set up" ? You don;t have to set up
> anything.
>
> Just type:
>
> 	git-send-email --to u-boot at lists.denx.de patch...

You forgot about the configuration you have done in your ~/.gitconfig file 
([sendemail] section, smtpserver...). But is not really hard to configure. 
And it really is worth the effort.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================