[U-Boot] new board for new to u-boot

[Mindaugas]

Hi,



I have an idea to port linux (u-boot at first, of course) to board with  
MediaTek's MT6226 cpu running at 26MHz. That's phone actually. They are  
cheap - so it's perfect "board" to work with...
The MT6226 cpu is based on ARM7EJ-S processor. Board (phone) has 16Mb NOR  
flash, of course LCD, SD card interface, BT (Bluetooth) and of course GSM  
modules (two, because it's Chinese Dual SIM phone). One of modules is  
independent GSM module and connected to one of MT6226 UART port.

So i would like to ask for more experienced programmers, is it at all  
possible to port anything to this device?  At first i'm thinking to port  
very minimal u-boot with only serial interface.

mendoza