[U-Boot] [PATCH 1/3] update linux/list

Jean-Christophe PLAGNIOL-VILLARD plagnioj at jcrosoft.com
Sun Aug 31 04:36:20 CEST 2008


Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
 include/linux/list.h   |  506 +++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/poison.h |   11 +
 2 files changed, 472 insertions(+), 45 deletions(-)
 create mode 100644 include/linux/poison.h

diff --git a/include/linux/list.h b/include/linux/list.h
index e6492f7..aeeeb21 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -1,6 +1,9 @@
 #ifndef _LINUX_LIST_H
 #define _LINUX_LIST_H
 
+#include <linux/stddef.h>
+#include <linux/poison.h>
+
 #ifndef ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(const void *x) {;}
@@ -25,9 +28,11 @@ struct list_head {
 #define LIST_HEAD(name) \
 	struct list_head name = LIST_HEAD_INIT(name)
 
-#define INIT_LIST_HEAD(ptr) do { \
-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
-} while (0)
+static inline void INIT_LIST_HEAD(struct list_head *list)
+{
+	list->next = list;
+	list->prev = list;
+}
 
 /*
  * Insert a new entry between two known consecutive entries.
@@ -87,13 +92,37 @@ static inline void __list_del(struct list_head *prev, struct list_head *next)
 /**
  * list_del - deletes entry from list.
  * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is in an undefined state.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
  */
 static inline void list_del(struct list_head *entry)
 {
 	__list_del(entry->prev, entry->next);
-	entry->next = (void *) 0;
-	entry->prev = (void *) 0;
+	entry->next = LIST_POISON1;
+	entry->prev = LIST_POISON2;
+}
+
+/**
+ * list_replace - replace old entry by new one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * If @old was empty, it will be overwritten.
+ */
+static inline void list_replace(struct list_head *old,
+				struct list_head *new)
+{
+	new->next = old->next;
+	new->next->prev = new;
+	new->prev = old->prev;
+	new->prev->next = new;
+}
+
+static inline void list_replace_init(struct list_head *old,
+					struct list_head *new)
+{
+	list_replace(old, new);
+	INIT_LIST_HEAD(old);
 }
 
 /**
@@ -130,37 +159,129 @@ static inline void list_move_tail(struct list_head *list,
 }
 
 /**
+ * list_is_last - tests whether @list is the last entry in list @head
+ * @list: the entry to test
+ * @head: the head of the list
+ */
+static inline int list_is_last(const struct list_head *list,
+				const struct list_head *head)
+{
+	return list->next == head;
+}
+
+/**
  * list_empty - tests whether a list is empty
  * @head: the list to test.
  */
-static inline int list_empty(struct list_head *head)
+static inline int list_empty(const struct list_head *head)
 {
 	return head->next == head;
 }
 
-static inline void __list_splice(struct list_head *list,
-				 struct list_head *head)
+/**
+ * list_empty_careful - tests whether a list is empty and not being modified
+ * @head: the list to test
+ *
+ * Description:
+ * tests whether a list is empty _and_ checks that no other CPU might be
+ * in the process of modifying either member (next or prev)
+ *
+ * NOTE: using list_empty_careful() without synchronization
+ * can only be safe if the only activity that can happen
+ * to the list entry is list_del_init(). Eg. it cannot be used
+ * if another CPU could re-list_add() it.
+ */
+static inline int list_empty_careful(const struct list_head *head)
+{
+	struct list_head *next = head->next;
+	return (next == head) && (next == head->prev);
+}
+
+/**
+ * list_is_singular - tests whether a list has just one entry.
+ * @head: the list to test.
+ */
+static inline int list_is_singular(const struct list_head *head)
+{
+	return !list_empty(head) && (head->next == head->prev);
+}
+
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
+static inline void __list_splice(const struct list_head *list,
+				 struct list_head *prev,
+				 struct list_head *next)
 {
 	struct list_head *first = list->next;
 	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
 
-	first->prev = head;
-	head->next = first;
+	first->prev = prev;
+	prev->next = first;
 
-	last->next = at;
-	at->prev = last;
+	last->next = next;
+	next->prev = last;
 }
 
 /**
- * list_splice - join two lists
+ * list_splice - join two lists, this is designed for stacks
  * @list: the new list to add.
  * @head: the place to add it in the first list.
  */
-static inline void list_splice(struct list_head *list, struct list_head *head)
+static inline void list_splice(const struct list_head *list,
+				struct list_head *head)
 {
 	if (!list_empty(list))
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
 }
 
 /**
@@ -174,7 +295,24 @@ static inline void list_splice_init(struct list_head *list,
 				    struct list_head *head)
 {
 	if (!list_empty(list)) {
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+		INIT_LIST_HEAD(list);
+	}
+}
+
+/**
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ *
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
+ */
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
+{
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
 		INIT_LIST_HEAD(list);
 	}
 }
@@ -186,28 +324,53 @@ static inline void list_splice_init(struct list_head *list,
  * @member:	the name of the list_struct within the struct.
  */
 #define list_entry(ptr, type, member) \
-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+	container_of(ptr, type, member)
+
+/**
+ * list_first_entry - get the first element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_first_entry(ptr, type, member) \
+	list_entry((ptr)->next, type, member)
 
 /**
  * list_for_each	-	iterate over a list
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each(pos, head) \
-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
-		pos = pos->next, prefetch(pos->next))
+	for (pos = (head)->next; prefetch(pos->next), pos != (head); \
+        	pos = pos->next)
+
+/**
+ * __list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @head:	the head for your list.
+ *
+ * This variant differs from list_for_each() in that it's the
+ * simplest possible list iteration code, no prefetching is done.
+ * Use this for code that knows the list to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __list_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
 /**
  * list_for_each_prev	-	iterate over a list backwards
- * @pos:	the &struct list_head to use as a loop counter.
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
  */
 #define list_for_each_prev(pos, head) \
-	for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
-		pos = pos->prev, prefetch(pos->prev))
+	for (pos = (head)->prev; prefetch(pos->prev), pos != (head); \
+        	pos = pos->prev)
 
 /**
- * list_for_each_safe	-	iterate over a list safe against removal of list entry
- * @pos:	the &struct list_head to use as a loop counter.
+ * list_for_each_safe - iterate over a list safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
  * @n:		another &struct list_head to use as temporary storage
  * @head:	the head for your list.
  */
@@ -216,43 +379,296 @@ static inline void list_splice_init(struct list_head *list,
 		pos = n, n = pos->next)
 
 /**
+ * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev_safe(pos, n, head) \
+	for (pos = (head)->prev, n = pos->prev; \
+	     prefetch(pos->prev), pos != (head); \
+	     pos = n, n = pos->prev)
+
+/**
  * list_for_each_entry	-	iterate over list of given type
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
 #define list_for_each_entry(pos, head, member)				\
-	for (pos = list_entry((head)->next, typeof(*pos), member),	\
-		     prefetch(pos->member.next);			\
-	     &pos->member != (head);					\
-	     pos = list_entry(pos->member.next, typeof(*pos), member),	\
-		     prefetch(pos->member.next))
+	for (pos = list_entry((head)->next, typeof(*pos), member);	\
+	     prefetch(pos->member.next), &pos->member != (head); 	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head); 	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
+ * @pos:	the type * to use as a start point
+ * @head:	the head of the list
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
+ */
+#define list_prepare_entry(pos, head, member) \
+	((pos) ? : list_entry(head, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue(pos, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member);	\
+	     prefetch(pos->member.next), &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_from - iterate over list of given type from the current point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing from current position.
+ */
+#define list_for_each_entry_from(pos, head, member) 			\
+	for (; prefetch(pos->member.next), &pos->member != (head);	\
+	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
  * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
- * @pos:	the type * to use as a loop counter.
+ * @pos:	the type * to use as a loop cursor.
  * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
  */
 #define list_for_each_entry_safe(pos, n, head, member)			\
 	for (pos = list_entry((head)->next, typeof(*pos), member),	\
-		n = list_entry(pos->member.next, typeof(*pos), member); \
-	     &pos->member != (head);					\
+		n = list_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
 	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
 
 /**
- * list_for_each_entry_continue -	iterate over list of given type
- *			continuing after existing point
- * @pos:	the type * to use as a loop counter.
+ * list_for_each_entry_safe_continue
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
  * @head:	the head for your list.
  * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type, continuing after current point,
+ * safe against removal of list entry.
+ */
+#define list_for_each_entry_safe_continue(pos, n, head, member) 		\
+	for (pos = list_entry(pos->member.next, typeof(*pos), member), 		\
+		n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_from
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate over list of given type from current point, safe against
+ * removal of list entry.
+ */
+#define list_for_each_entry_safe_from(pos, n, head, member) 			\
+	for (n = list_entry(pos->member.next, typeof(*pos), member);		\
+	     &pos->member != (head);						\
+	     pos = n, n = list_entry(n->member.next, typeof(*n), member))
+
+/**
+ * list_for_each_entry_safe_reverse
+ * @pos:	the type * to use as a loop cursor.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Iterate backwards over list of given type, safe against removal
+ * of list entry.
+ */
+#define list_for_each_entry_safe_reverse(pos, n, head, member)		\
+	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
+		n = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
+
+/*
+ * Double linked lists with a single pointer list head.
+ * Mostly useful for hash tables where the two pointer list head is
+ * too wasteful.
+ * You lose the ability to access the tail in O(1).
+ */
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
+#define HLIST_HEAD_INIT { .first = NULL }
+#define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
+#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
+static inline void INIT_HLIST_NODE(struct hlist_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+static inline int hlist_unhashed(const struct hlist_node *h)
+{
+	return !h->pprev;
+}
+
+static inline int hlist_empty(const struct hlist_head *h)
+{
+	return !h->first;
+}
+
+static inline void __hlist_del(struct hlist_node *n)
+{
+	struct hlist_node *next = n->next;
+	struct hlist_node **pprev = n->pprev;
+	*pprev = next;
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_del(struct hlist_node *n)
+{
+	__hlist_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_del_init(struct hlist_node *n)
+{
+	if (!hlist_unhashed(n)) {
+		__hlist_del(n);
+		INIT_HLIST_NODE(n);
+	}
+}
+
+static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
+{
+	struct hlist_node *first = h->first;
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	h->first = n;
+	n->pprev = &h->first;
+}
+
+/* next must be != NULL */
+static inline void hlist_add_before(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	n->pprev = next->pprev;
+	n->next = next;
+	next->pprev = &n->next;
+	*(n->pprev) = n;
+}
+
+static inline void hlist_add_after(struct hlist_node *n,
+					struct hlist_node *next)
+{
+	next->next = n->next;
+	n->next = next;
+	next->pprev = &n->next;
+
+	if(next->next)
+		next->next->pprev  = &next->next;
+}
+
+#define hlist_entry(ptr, type, member) container_of(ptr,type,member)
+
+#define hlist_for_each(pos, head) \
+	for (pos = (head)->first; pos && ({ prefetch(pos->next); 1; }); \
+	     pos = pos->next)
+
+#define hlist_for_each_safe(pos, n, head) \
+	for (pos = (head)->first; pos && ({ n = pos->next; 1; }); \
+	     pos = n)
+
+/**
+ * hlist_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry(tpos, pos, head, member)			 \
+	for (pos = (head)->first;					 \
+	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_continue - iterate over a hlist continuing after current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_continue(tpos, pos, member)		 \
+	for (pos = (pos)->next;						 \
+	     pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_from - iterate over a hlist continuing from current point
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_for_each_entry_from(tpos, pos, member)			 \
+	for (; pos && ({ prefetch(pos->next); 1;}) &&			 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
  */
-#define list_for_each_entry_continue(pos, head, member)			\
-	for (pos = list_entry(pos->member.next, typeof(*pos), member),	\
-		     prefetch(pos->member.next);			\
-	     &pos->member != (head);					\
-	     pos = list_entry(pos->member.next, typeof(*pos), member),	\
-		     prefetch(pos->member.next))
+#define hlist_for_each_entry_safe(tpos, pos, n, head, member) 		 \
+	for (pos = (head)->first;					 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
 
 #endif
diff --git a/include/linux/poison.h b/include/linux/poison.h
new file mode 100644
index 0000000..b3d873b
--- /dev/null
+++ b/include/linux/poison.h
@@ -0,0 +1,11 @@
+#ifndef _LINUX_POISON_H
+#define _LINUX_POISON_H
+
+/********** include/linux/list.h **********/
+/*
+ * used to verify that nobody uses non-initialized list entries.
+ */
+#define LIST_POISON1  ((void *) 0x0)
+#define LIST_POISON2  ((void *) 0x0)
+
+#endif
-- 
1.5.6.3



More information about the U-Boot mailing list