[U-Boot-Users] sam9263ek not booting uboot dataflash

[michael]

E Robertson wrote:
> On 2/12/08, michael <trimarchi at gandalf.sssup.it> wrote:
>   
>> Hi,
>>     
>>> That's exactly what I have but I always get this after about 24% :
>>>
>>> *************************
>>> SEND-class command failed.
>>>  Packets sent: 69
>>>  Retransmissions: 11
>>>  Timeouts: 12
>>>  Damaged packets: 0
>>>  Fatal Kermit Protocol Error: Too many retries
>>>
>>> HINTS... If the preceding error message does not explain the failure:
>>>  . Try changing the remote Kermit's FLOW-CONTROL setting.
>>>  . Try it again with SET STREAMING OFF.
>>>  . Try it again with SET PARITY SPACE.
>>>  . As a last resort, give a ROBUST command and try again.
>>> Also:
>>>  . Be sure the source file has read permission.
>>>  . Be sure the target directory has write permission.
>>> (Use SET HINTS OFF to suppress hints.)
>>> *************************
>>> ~
>>>
>>>
>>>       
>> The system is up? Do you have the u-boot console again? Do you choose
>> a good memory address for starting download?
>>     
>
> That was the problem. I choose a new address and it downloaded ok.
> However, it seems that my initial conclusion was correct in that it's
> the u-boot build. It hangs when I ran the new image. The old "working
> image"  at least ran. It looks like I need to do some work on the boot
> process in uboot.
>
> Thanks much for your help.
>
>   
Can you send me your diff?