[U-Boot-Users] [PATCH] Extend ATI Radeon driver to support more video modes

[Rodolfo Giometti]

On Thu, Feb 14, 2008 at 01:39:14AM +0100, Wolfgang Denk wrote:
> In message <47B38277.6010001 at denx.de> you wrote:
> > 
> > >> +#if 1 /* @ 60 Hz */
> > >> +		mode->crtc_h_total_disp = 0x009f00d2;
> > >> +		mode->crtc_h_sync_strt_wid = 0x000e0528;
> > >> +		mode->crtc_v_total_disp = 0x03ff0429;
> > >> +		mode->crtc_v_sync_strt_wid = 0x00030400;
> > >> +		mode->crtc_pitch = 0x00a000a0;
> > >> +		mode->ppll_div_3 = 0x00010060;
> > >> +#else /* @ 75 Hz */
> > >> +		mode->crtc_h_total_disp = 0x009f00d2;
> > >> +		mode->crtc_h_sync_strt_wid = 0x00120508;
> > >> +		mode->crtc_v_total_disp = 0x03ff0429;
> > >> +		mode->crtc_v_sync_strt_wid = 0x00030400;
> > >> +		mode->crtc_pitch = 0x00a000a0;
> > >> +		mode->ppll_div_3 = 0x00010078;
> > >> +#endif
> > > 
> > > Mmm... better adding a configuration define here or just remove the
> > > unused code.
> > 
> > Ok, I'm going to drop the unused code then.
> 
> No, please keep it as reference in case anybody needs this later.

Uh? =:-o Why did you change your mind? ;)

|  Delivery-date: Sun, 01 Apr 2007 15:18:41 +0200
|  From: Wolfgang Denk <wd at denx.de>
|  To: Rodolfo Giometti <giometti at enneenne.com>
|  cc: Markus Klotzb?cher <mk at denx.de>
|  Subject: Re: [PATCH] ISP116x HCD (Host Controller Driver)
|
|  [snip]
|
|  Please remove code in "#if 0 ... #endif" blocks.
|
|  [snip]
|
|  Best regards,
|
|  Wolfgang Denk

However I suggested also to add a configuration define, something
like:

#if defined(CFG_ATI_RADEON_60HZ)
...
#elif defined(CFG_ATI_RADEON_75HZ)
...
#else
#error "..."
#endif

This allow keeping the code in a better style... or we can rewrite it
as follow:

/* @ 60 Hz */
mode->crtc_h_total_disp = 0x009f00d2;
mode->crtc_h_sync_strt_wid = 0x000e0528;
mode->crtc_v_total_disp = 0x03ff0429;
mode->crtc_v_sync_strt_wid = 0x00030400;
mode->crtc_pitch = 0x00a000a0;
mode->ppll_div_3 = 0x00010060;

/* @ 75 Hz
 *
 * Still untested. Just use it as reference for future improvemets.
 *
 * mode->crtc_h_total_disp = 0x009f00d2;
 * mode->crtc_h_sync_strt_wid = 0x00120508;
 * mode->crtc_v_total_disp = 0x03ff0429;
 * mode->crtc_v_sync_strt_wid = 0x00030400;
 * mode->crtc_pitch = 0x00a000a0;
 * mode->ppll_div_3 = 0x00010078;
 */

Ciao,

Rodolfo 

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at gnudd.com
Embedded Systems                     		giometti at linux.it
UNIX programming                     phone:     +39 349 2432127