[U-Boot-Users] Enabling UART0 and UART1

[Sean]

Hi All,

I have enabled both UART0 and UART 1 using the CONFIG_SERIAL_MULTI in my
board specific header file. The board is based on PPC 440GX processor. I
used the serial1_puts and serial1_getc to access the UART1 but without
access. Does anybody have used this functions before?

Thanks,

-- Sean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080215/eb4a8227/attachment.htm