[U-Boot-Users] [PATCH] NAND update 2

[Stefan Roese]

On Friday 04 January 2008, William Juul wrote:
> > I'm trying to integrate your patches right now. Looks quite good so far
> > but I'm facing some problems on a ppc4xx board with a large page NAND
> > chip. Small page devices are fine.
> >
> > Did you ever test this stuff on large page devices? Which ones?
>
> We did run this on large page devices with 4KB page size (total size
> of 1/2 GB). Unfortunately the devices are/were under NDA as they
> are/were not officially released yet.
> Stig can you verify if any/both of the flashes can be named here?

Not needed anymore. I found my problem. A timeout was calculated incorrectly. 
I need to change nand_base.c at one place to make it work on my platform with 
my NAND chips. I'll post a till beginning of next week, so that you (or Stig) 
can test it on your platform too.

> > BTW: What is the platform you "normally" test on (ARM, MIPS, PPC...)?
>
> We had two custom boards, one ARM based (926) and one PPC83xx.
>
> I will not have access to the build environment and boards the next
> couple of months, but Stig Olsen is more than capable of answering
> questions (if he has the time :-)

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================